The Best HPE2-T37 Exam Study Material Premium Files and Preparation Tool (Oct-2023)
Get Instant Access to HPE2-T37 Practice Exam Questions
NEW QUESTION # 10
Click the option that will prevent the appliance from sending any email notifications or forwarding any SNMP traps that are related to the server hardware.
Answer:
Explanation:
NEW QUESTION # 11
What is required to add remote frame link topology to HPE OneView?
- A. Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.
- B. Management ports of the remote frame link topology must be connected to the management LAN.
- C. The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.
- D. The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.
Answer: A
NEW QUESTION # 12
You are creating a Logical Interconnect Group (LIG) that will be used to configure SAS connectivity. What is the maximum number of frames that can be inducted in this LIG?
- A. 5 frames
- B. 1 frame
- C. 2 frames
- D. 3 frames
- E. 4 frames
Answer: B
NEW QUESTION # 13
Refer to the exhibit.
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?
- A. The firmware repository service must be restarted using maintenance connection.
- B. The refresh procedure must be performed on each logical enclosure to refresh firmware.
- C. The firmware repository is not defined within firmware compliance report.
- D. All of the components are up to date and compliant with firmware baseline.
Answer: A
NEW QUESTION # 14
You are deploying HPE OneView to manage a customer's HPE ProLiant servers Is this statement about appliance availability true?
- A. HPE OneView has a built-in HA feature that can be activated with an additional license
- B. During hpe oneView deployment customer may select configure proprietary HA mode.
- C. HA features for HPE OneView are enabled only if the appliance is deployed on an HPE SimpliVity cluster
- D. HPE OneView availability relies on HA features provoed by the hypervisor
Answer: D
NEW QUESTION # 15
You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment. From which level must this procedure be initiated?
- A. Logical Interconnect
- B. Logical Enclosure
- C. Logical Interconnect Group
- D. Server Profile
Answer: B
NEW QUESTION # 16
Which statement about the volume template is true?
- A. Users will be able to select storage pool during volume creation
- B. A volume created using this template mil not support snapshots
- C. Users will be able to change sharing type and volume capacity
- D. A volume created using this template will not support deduplication
Answer: C
NEW QUESTION # 17
Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.
How will you explain licensing rules for this product?
- A. One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than 10 Compute Modules are installed in the frame.
- B. If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.
- C. As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.
- D. As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.
Answer: A
NEW QUESTION # 18
A customer wants to estimate the cost of the licenses required to manage HPE Synergy and some external components When component includes an HPE OneView license for management?
- A. Master Module
- B. Compute Module
- C. Logical Enclosure
- D. Storage Array
Answer: B
NEW QUESTION # 19
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks are not added to the Logical Interconnect Group configuration.
- B. The other networks are not configured with the required Smart Link parameter.
- C. The other networks are configured with a purpose other than General or Management.
- D. The other networks have Private Network' selected, which hides them from Compute Modules.
Answer: D
NEW QUESTION # 20
You want a server profile to be automatically applied when an HPE Synergy Compute Module is replaced.
Click the appropriate configuration option.
Answer:
Explanation:
NEW QUESTION # 21
You want a server profile to be automatically applied when an HPE Synergy Compute Module is replaced.
Click the appropriate configuration option.
Answer:
Explanation:
NEW QUESTION # 22
Which connection type can be defined within a server profile for an MPE ProLiant DL server?
- A. FC
- B. RoCE
- C. iSCSI
- D. Ethernet
Answer: A
NEW QUESTION # 23
Which locations are supported for HPE OneView remote scheduled backup? (Choose two.)
- A. FTP
- B. HTTP
- C. SFTP
- D. HTTPS
- E. SCP
Answer: C,E
Explanation:
Scheduled to be uploaded to the remote location.
NEW QUESTION # 24
Refer to the exhibit.
Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available. What is a possible reason?
- A. A dedicated license must be added to HPE OneView to enable this feature.
- B. Some master modules only support a redundant setup.
- C. Firmware on the master modules is too low to support highly available setup.
- D. There are not sufficient frames for highly available setup.
Answer: B
NEW QUESTION # 25
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks have Private Network' selected, which hides them from Compute Modules.
- B. The other networks are not configured with the required Smart Link parameter.
- C. The other networks are not added to the Logical Interconnect Group configuration.
- D. The other networks are configured with a purpose other than General or Management.
Answer: C
NEW QUESTION # 26
Within HPE OneView you can configure SNMPv1 read community string.
What is the purpose of this feature?
- A. This is an SNMP community string that will be used to receive traps from HPE Onboard Administrators
- B. This is an SNMP community string that will be used when traps are forwarded to other SNMP applications
- C. This is an SNMP community string that will be used to receive a trap's SNMP Agent
- D. This is an SNMP community string that will be used when traps are forwarded to a WBEM Provider
Answer: C
NEW QUESTION # 27
Which statement about an HPE OneView server profile is true?
- A. A server profile created for a specific server hardware type cannot be moved to a server with a different server hardware type.
- B. A server profile can be created only for HPE BladeSystem, HPE Synergy, and HPE Superdome Flex servers.
- C. A server profile can be used to update firmware and drivers when the operating system on the server is up and running.
- D. A server profile can be used to configure a local storage controller, but cannot be used to configure SAN-based storage.
Answer: D
NEW QUESTION # 28
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.
Answer:
Explanation:
NEW QUESTION # 29
......
HPE2-T37 certification exam is a professional-level exam offered by Hewlett Packard Enterprise (HPE) that assesses the skills and knowledge of individuals in using HPE OneView. HPE OneView is a management platform that streamlines the management of HPE infrastructure, including servers, storage, and networking devices. HPE2-T37 exam is designed for IT professionals who are responsible for managing HPE infrastructure and want to demonstrate their expertise in using HPE OneView.
HP HPE2-T37 (Using HPE OneView) Certification Exam is a professional-level certification exam designed for IT professionals who want to validate their knowledge and skills in using HPE OneView to manage and deploy infrastructure solutions. Using HPE OneView certification exam is ideal for individuals who work with HPE OneView software, including system administrators, network administrators, and storage administrators.
Validate your Skills with Updated HPE2-T37 Exam Questions & Answers and Test Engine: https://www.passtorrent.com/HPE2-T37-latest-torrent.html
Reliable Study Materials & Testing Engine for HPE2-T37 Exam Success!: https://drive.google.com/open?id=1lafQbTDkPH2Qec0T4VQB9Qy5vcR1QV7D