[Sep 24, 2022] Fully Updated 1z0-996-22 Dumps - 100% Same Q&A In Your Real Exam
Latest 1z0-996-22 Exam Dumps - Valid and Updated Dumps
Oracle 1z0-996-22 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 18
Which statement correctly describes the relation between a device and a measuring component?
- A. A device can have any combination of interval and/or scalar measuring components.
- B. A device should have only one measuring component type.
- C. Two measuring components on the same device should have the same Units of Measure (UOM).
- D. A device configuration links a device only to interval channels.
Answer: A
NEW QUESTION 19
Which configuration steps are required to derive loss-adjusted kWh on a measuring component based on a loss factor value related to a service point?
- A. Configure a factor and derivation algorithm, and then associate both to the Measuring Component Type and service point.
- B. Configure an SQI and the derivation algorithm, and then associate the algorithm to the Measuring Component Type and SQI to the service point.
- C. Configure a Service Point Characteristic Type and derivation algorithm, and then associate the algorithm to the Measuring Component Type and the characteristic value to the service point.
- D. Configure a Service Point Characteristic Type, factor, derivation algorithm, and Service Quantity Identifier (SQI), and then associate the SQI and derivation algorithm to the Measuring Component Type and the characteristic value to the service point.
- E. Configure a factor and derivation algorithm, and then associate the factor to the Measuring Component Type and the derivation algorithm to the service point.
Answer: B
NEW QUESTION 20
How many bill segment-related financial transactions do Payment Arrangements have?
- A. none
- B. one
- C. depends on the number of bills that will contain the customer's payment arrangement details
- D. unlimited
- E. depends on the number of payments that are part of the payment arrangement
Answer: B
Explanation:
Reference:
20Bill%20Customers/4.2.2.12%20CCB.v2.4.Manage%20Payment%20Arrangement%20Charges.pdf (14)
NEW QUESTION 21
Which statement supports usage transaction calculation?
- A. Bill determinants are derived from the final measurements for only interval measuring components or devices installed at the usage subscription's service points during the calculation period.
- B. Bill determinants are derived from the initial measurement data of the measuring components devices installed at the usage subscription's service points during calculation period.
- C. Bill determinants are derived from the initial measurement data of the measuring components installed at the usage subscription's devices during the calculation period.
- D. Bill determinants are derived from the final measurements of the measuring components or devices installed at the usage subscription's service points during the calculation period.
Answer: D
NEW QUESTION 22
How many Tenders can a Payment Event have?
- A. one Tender per Payment Event
- B. one Tender for each account the payment is applied to
- C. no Tenders for Payment Events, only Payment Segments
- D. no Tenders for Payment Events, only Payments
- E. one Tender for each form of Payment submitted
Answer: E
NEW QUESTION 23
How many devices can be installed at a service point at an instance in time?
- A. one for each measuring component
- B. up to three devices
- C. one for each service type
- D. exactly one device
Answer: D
NEW QUESTION 24
Usage transactions can contain date breaks. Which is used to supply date breaks?
- A. the Usage Subscription BO
- B. the Deferred Monitor Calculation Algorithm
- C. the requesting system or user input
- D. the Usage Subscription Type
Answer: D
NEW QUESTION 25
If a customer makes a payment for more than what is due for the account, which entity contains the logic for how this overpayment should be handled?
- A. Service Agreement Type
- B. Customer Class
- C. Pay Segment Type
- D. Installation Options
- E. Tender Type
Answer: A,B,D
NEW QUESTION 26
You are configuring a VEE group to include rules to be executed when loading the initial measurement data (IMD).
What is the VEE group directly associated with?
- A. Device Type and Measuring Component Type
- B. Measuring Component Type
- C. Device Configuration Type
- D. Usage Type
- E. Device Type
Answer: C
NEW QUESTION 27
How many bill segment-related financial transactions do pay plans have?
- A. none
- B. depends on the number of payments that is part of the pay plan
- C. unlimited
- D. depends on the number of bills that will contain the customer's pay plan commitments
- E. one
Answer: D
NEW QUESTION 28
Your customer's initial measurement data (IMD) has been imported and can be viewed through the Measuring Component portal, but is not in the "Final" measurement status.
What can you assume that the IMD has passed?
- A. High/Low Check Validation
- B. Multiplier Check Validation
- C. Critical Validation
- D. Sum Check Validation
- E. Critical Validation, High/Low Check Validation, and Sum Check Validation
Answer: B
NEW QUESTION 29
What correctly describes the possible causes of price proration?
- A. change in Rate Schedule only
- B. change in Rate Version Calculation Group only
- C. changes in Rate Schedule and Bill Factor only
- D. change in Bill Factor only
- E. changes in Rate Version Calculation Group and Bill Factor only
Answer: C
NEW QUESTION 30
How many service agreements are linked to a severance process?
- A. all service agreements that are connected to the initiating overdue process
- B. zero - accounts are linked to severance processes
- C. one
- D. any number defined by the business user
- E. all service agreements that are connected to the initiating collection process
Answer: D
NEW QUESTION 31
How do you ensure that specific Validation, Editing, and Estimation (VEE) rules are applied to estimated measurements?
- A. by adding the VEE Group to the Device Configuration Type
- B. by adding the VEE Group to the Device Type
- C. by adding the VEE Group as the Fallback VEE Group for the appropriate VEE role
- D. by adding the estimation rules to the Manual Override VEE Group to the Measuring Component Type
Answer: D
NEW QUESTION 32
At what stage in the initial measurement data (IMD) import process will the application of meter multipliers be performed?
- A. VEE
- B. post-VEE
- C. Critical Validation
- D. Prepare for VEE
Answer: C
NEW QUESTION 33
Critical validation rules verify the integrity of the initial measurement data (IMD). If an implementation needs to add new critical validations, where would you configure them?
- A. as new lifecycle algorithms on the IMD Seeder BO (D1-IMDSeeder)
- B. in the pre-processing algorithm of the IMD Seeder BO (Dl-IMDSeeder)
- C. in the validation algorithm on the IMD Seeder BO (D1-IMDSeeder)
- D. as options on the IMD Seeder BO (D1-IMDSeeder)
- E. in the schema of the IMD Seeder BO (D1-IMDSeeder)
Answer: B
NEW QUESTION 34
What determines an Account's Balance?
- A. the logic defined in a plug-in spot on the Installations Option
- B. the sum of all the Financial Transactions linked directly to the service agreements related to the account
- C. the sum of all the balances recorded in the "Balance Due" field on each service agreement related to the account
- D. the amount recorded in the "Balance Due" field on an account
- E. the sum of all the Financial Transactions linked directly to the account
Answer: E
NEW QUESTION 35
A usage subscription must exist before usage transactions can be calculated for a specific service point.
Where do you configure the usage recipient?
- A. in the Measuring Component Type
- B. in the Usage Subscription Type
- C. in the Device Type
- D. in the Service Point Type
- E. in the Usage Rule Type
Answer: B
NEW QUESTION 36
How many derived values can a final measurement have in addition to the primary measured value?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 37
......
Free Sales Ending Soon - 100% Valid 1z0-996-22 Exam: https://www.passtorrent.com/1z0-996-22-latest-torrent.html
Verified 1z0-996-22 Exam Questions Certain Success: https://drive.google.com/open?id=1s2o8WwzNUab2Qqp7Ia8tNerA6WRyzGNe