CheckPoint 156-816.61 Practice Verified Answers - Pass Your Exams For Sure! [2021]
Valid Way To Pass CCMSE's 156-816.61 Exam
NEW QUESTION 27
When configuring Virtual Systems with overlapping IP Addressing, the Virtual Systems must:
- A. Perform in Bridge Mode
- B. Define VLAN tags
- C. Be on the same network
- D. Perform Network Address Translation
- E. Be include in a VPN
Answer: D
NEW QUESTION 28
Which of the following is a type of VLAN membership?
- A. Protocol-based
- B. Application-based
- C. Port-based
- D. Session-based
- E. Time-based
Answer: A
NEW QUESTION 29
Consider the following scenario: Your Network configuration requires that you configure a single interfaces on the VSX Gateway to lead to multiple networks. A different Virtual System must protect each network sending traffic through the VSX Gateway. You configured a dedicated management interface on the VSX Gateway, along with 1 External Virtual Router and 4 Virtual Systems one for each Customer. Which of the following hardware devices must be used to connect the different networks to the single shared interface?
- A. Router
- B. VLAN-capable switch
- C. Content-intelligent switch
- D. Frame cache-redirection enabled switch
- E. Jumbo Frame-enabled switch
Answer: B
NEW QUESTION 30
When installing the Security Policy of a Management Virtual System (MVS), what objects are available for Policy installation, other than the MVS?
- A. No other object is available for Policy installation
- B. All configured Virtual Routers
- C. All configured Virtual Systems
- D. All configured Virtual Systems and the External Virtual Router
- E. All configured Virtual Switches
Answer: B
NEW QUESTION 31
Which of the following VLAN membership types is considered explicit in its propogation?
- A. Protocol-based
- B. Application-based
- C. MAC address-based
- D. Session-based
Answer: A
NEW QUESTION 32
Which of the following objects allows you to configure resource settings, to limit the number of concurrent connections?
- A. External Virtual Router
- B. Internal Virtual Router
- C. Virtual Switch
- D. Virtual Systems
- E. VSX Gateway
Answer: D
NEW QUESTION 33
The ______________ interface is configured in a VLAN environment, to allow multiple Virtual Systems to share a single physical interface on a VSX Gateway.
- A. Physical
- B. Virtual
- C. Symbolic
- D. Warp
- E. Synchronization
Answer: B
NEW QUESTION 34
Which of the following VSX components maintain Layer 3 Connectivity?
- A. External Virtual Switch
- B. Internal Virtual Switch
- C. Virtual Router
- D. VLAN Interface
- E. Virtual System in Bridge Moe
Answer: C
NEW QUESTION 35
You need to provide a security layer for an existing core network. You need an inspection module that operates at layer 2, is completely transparent and does not impact the existing IP structure or different control protocols in use. Which of the following virtual devise will perform the kind of inspection you need?
- A. External Virtual Router
- B. Internal Virtual Router
- C. Virtual System in Bridge Mode
- D. Virtual Switch
- E. Virtual System
Answer: C
NEW QUESTION 36
If you want your customer's virtual systems to give protected hosts access to and from the internet, which of the following must be configured as a Public IP address?
- A. Default Gateway IP Address of the Virtual Switch
- B. Default Gateway IP Address of the Management Virtual System
- C. Main IP of the Virtual Switch
- D. Main IP of the Customer's Virtual System
- E. Main IP of the Management Virtual System
Answer: D
NEW QUESTION 37
Security Policies enforced by Virtual Systems are applied to ___________ connected to the Virtual IP Stack.
- A. Virtual Interfaces
- B. Warp and Virtual Interfaces
- C. All Interfaces
- D. Physical Interfaces
- E. Warp Interfaces
Answer: C
NEW QUESTION 38
When configuring _________, the interface leading to the External Virtual Router should be set as the main IP Address and should be publicly routable.
- A. Network Address Translation
- B. Anti-spoofing
- C. A Virtual Switch
- D. Virtual Systems in Bridge mode
- E. VLAN Trunking Interfaces
Answer: A
NEW QUESTION 39
In a VLAN Tag added to a frame header, the __________ is a 2 byte number that identifies a frame as tagged.
- A. Tag Control information
- B. User_priority
- C. Tag Protocol Identifier
- D. VLAN identifier
- E. Canonical Format Indicator
Answer: C
NEW QUESTION 40
VSX clusters are defined at two levels:
- A. VSX cluster and virtual device
- B. VSX Gateway and physical device
- C. VSX cluster and VSX Gateway
- D. VSX cluster and physical device
- E. VSX Gateway and Virtual device
Answer: E
NEW QUESTION 41
A Virtual System in Bridge Mode is a Virtual System that implements:
- A. Dynamic IP Routing
- B. Network Address Translation
- C. IP Routing
- D. Native Layer-2 Communications
- E. VLAN Tagging
Answer: D
NEW QUESTION 42
Consider the following scenario: A hub connects four hosts a VLAN-Tagged port on a switch. The hosts have IP addresses ranging from 10.0.0.1 to 10.0.0.4. The switch adds a VLAN Tag of 400 to all communication passing through it. Once communication from the second host on the hub passes through the switch port on the way to its destination on the external network, how does the traffic appear in SmartView Tracker? Assume that traffic enters the Gateway on interface eth3.
- A. eth3.2.400
- B. eth3.402
- C. eth3.2
- D. eth3.400.2
- E. eth3.400
Answer: E
NEW QUESTION 43
Which process uses an encrypted TCP connection to perform Full Synchronization of VSX Gateways in a cluster?
- A. synd
- B. fwd
- C. cpd
- D. vpnd
- E. srd
Answer: A
NEW QUESTION 44
A VSX cluster configuration is built from which three components?
- A. Synchronization Network, Internal Network, External Network
- B. Synchronization Network, Virtual Network, External Network
- C. Synchronization Network, Internal Communications Network, Virtual IP Addresses
- D. Management Network, Internal Virtual Network, Virtual IP Addresses
- E. Management Network, Internal Communications Network, Virtual IP Addresses
Answer: C
NEW QUESTION 45
Bridged Virtual Systems in a cluster monitor which of the following protocols, to fail over a bridged system?
- A. VTP
- B. MPLS
- C. PBDU
- D. OSPF
- E. STP
Answer: C
NEW QUESTION 46
What is the required to prevent loops in Virtual Systems in a Cluster XL environment?
- A. STP
- B. MPLS
- C. BPDU
- D. OSPF
- E. VRRP
Answer: A
NEW QUESTION 47
A Warp Link is a virtual point-to-point connection between a:
- A. Virtual System and another Virtual System
- B. Virtual Router and a physical interface
- C. Virtual Router and Virtual System
- D. Virtual Router and Virtual Switch
- E. Virtual System and the management interface
Answer: C
NEW QUESTION 48
Which of the following VSX components maintain Layer-3 connectivity?
- A. External Virtual Switch
- B. Internal Virtual Switch
- C. Virtual System in Bridge Mode
- D. Virtual Router
- E. VLAN interface
Answer: D
NEW QUESTION 49
How many Management Virtual System instances does each member of a VSX Gateway cluster run?
- A. One for each physical interface on the Gateway
- B. Two, the cluster MVS and the unique Gateway MVS
- C. One for each Virtual System configured on the Gateway
- D. One for each cluster member
- E. Only one
Answer: E
NEW QUESTION 50
Which of the following VSX Gateway configuration is valid?
- A. A shared NIC assigned to different Virtual Systems, with the same IP addresses on the same VLAN
- B. A shared NIC assigned to different Virtual Systems, with different IP addresses on the same VLAN
- C. Multiple NICs assigned the same IP addresses, for each Virtual System in the configuration but with different VLAN tags
- D. Multiple NICs assigned to different Virtual Systems in Bridge Mode, performing Hide NAT
- E. A shared NIC assigned to different Virtual Systems, with the same IP address on different VLANs
Answer: E
NEW QUESTION 51
......
CheckPoint 156-816.61 Pre-Exam Practice Tests | PassTorrent: https://www.passtorrent.com/156-816.61-latest-torrent.html