Master 2021 Latest The Questions HPE Master ASE Advanced Server Solutions Architect V3 and Pass HPE0-S22 Real Exam!
Penetration testers simulate HPE0-S22 exam PDF
NEW QUESTION 28
An architect takes the following notes during a meeting with a customer:
Which solution should the architect propose to help the customer overcome all of its project challenges?
- A. HPE Apollo 6000 solution with HPE 3PAR storage
- B. HPE Apollo 2000 solution with HPE 3PAR storage
- C. HPE BladeSystem solution with HPE 3PAR storage
- D. HPE ConvergedSystem 700 solution with HPE 3PAR storage
Answer: A
NEW QUESTION 29
A customer recently purchased an HPE Moonshot chassis to host its internal website. Subsequently, the customer reports difficulties deploying new cartridges in an efficient manner. The customer suggests exchanging the solution for a more traditional server platform.
What can the architect demonstrate to the customer to help solve the problem while preserving the validity of the original design solution?
- A. how to use iLO remote console to provide a graphical installation method for new nodes In order to interface with the specific server cartridge node, the mRCA must be installed in a specific slot within the chassis, relative to the linking server cartridge.
- B. how to use SCCM to provide a graphical installation method for new nodes
- C. how to add an mRCA module to provide a graphical installation method for new nodes
- D. how to use VSP to provide a graphical installation method for new nodes
Answer: C
NEW QUESTION 30
An architect is presenting a file-based transcoding solution to a customer. The solution will include a single HPE Moonshot 1500 chassis that will be directly connected to HPE Apollo 4530 storage via 4 x QSFP uplinks.
The customer is concerned about the significant traffic that will generated between the HPE Moonshot 1500 chassis and the HPE Apollo 4530 storage.
Which factor should the architect design into the solution to address the customer's concerns?
- A. Add uplinks as the workload increases
- B. Setup the solution so the cartridges use both adapters
- C. Install cartridges that have GPUs
- D. Add two HPN 5930 ToR switches with IRF
Answer: D
NEW QUESTION 31
An architect is planning an HPE Moonshot System deployment. The architect plans to individually connect each iLO CM module to the management network. The customer informs the architect that this plan requires too many 1GbE ports per rack for the data center infrastructure.
What is one way that the architect can alter the plan to meet the customer's needs, while still allowing iLO access to the HPE Moonshot Systems?
- A. Enable the iLO REST API on each cartridge node. The nodes will then accept iLO commands on the adapters that they use for production traffic.
- B. Add a second switch module and uplink module to each chassis to connect to the cartridge iLO ports. Stack the modules in different chassis and connect just one to the management network.
- C. Keep one iLO CM Management port connected to the network. Use the iLO CM link ports on each iLO CM module to daisy chain the chassis together.
- D. Configure iLO traffic to share the same adapters as production traffic. Configure VLANs on the HPE Moonshot switch modules to separate the two types of traffic.
Answer: B
NEW QUESTION 32
How does the HPE c7000 BladeSystems use of network infrastructure compare with the
HPE Apollo 6000's?
- A. The HPE c7000 BladeSystem offers greater port consolidation.
- B. The HPE Apollo 6000 uses fewer network ports per server.
- C. The HPE Apollo 6000 offers greater per server connectivity.
- D. The HPE c7000 BladeSystem offers less port variety.
Answer: D
NEW QUESTION 33
A customer plans to purchase some c7000 blade enclosures equipped with Virtual Connect FlexFabric modules to support its development and test team. The customer is concerned about frequent changes to the server blade connectivity. In the initial proposal, an architect included HPE OneView, and now the customer wants to learn how HPE OneView will address their concern.
Which HPE OneView functionality should the architect explain to the customer?
- A. the customer can create profile templates, deploy server profiles from the template, and, if necessary, use the same method to update server connectivity.
- B. all external connectivity changes will be automatically discovered and server profiles will be automatically updated to reflect the change.
- C. the customer can use different plugins to visualize network and storage connectivity, and change them by using the drag and drop method.
- D. the customer can access HPE Virtual Connect Enterprise Manager and perform connectivity changes for all servers in the same Virtual Connect Domain Group.
Answer: C
NEW QUESTION 34
DRAG DROP
Select all that apply.
Click and drag the Network Interface on the left to match it with its HPE Server Family on the right.
Answer:
Explanation:
NEW QUESTION 35
View the Exhibit.
Refer to the exhibit. An architect is planning an HPE Moonshot System with m710 cartridges to support a customer application virtualization solution. The customer indicated that the maximum acceptable response time for the solution is three seconds. The architect has implemented a POC and tested a single cartridge with different numbers of user sessions.
The architect monitored resource utilization throughout the tests. The results of the test with the point at which the response time exceeded three seconds are shown, marked as the "VSI max." What should the architect conclude from this test?
- A. CPU becomes a limiting factor around 50 sessions, so the architect should propose at least one cartridge per 45 or 50 users.
- B. None of the monitored resources shows signs of being a bottleneck, so the architect should consider other factors such as the HPE Moonshot switch module.
- C. The memory becomes a bottleneck before other resources, so the architect should propose m400 cartridges, which provide a higher memory capacity.
- D. The network adapter becomes a bottleneck before other resources, so the architect should propose m710p cartridges, which provide 10GbE ports.
Answer: D
NEW QUESTION 36
DRAG DROP
Select all that apply.
Click and drag the Network Interface on the left to match it with its HPE Server Family on the right.
Select and Place:
Answer:
Explanation:
NEW QUESTION 37
A customer has a Hadoop big data and analytics solution. The customer needs a server upgrade to improve performance for this solution and plans to add more solutions that draw on the data, such as a Cassandra NoSQL database. The customer is interested in a flexible HPE Big Data Reference Architecture approach.
Which solution meets the customer's needs?
- A. HPE Apollo 8000 Systems for the compute nodes and HPE Superdome X Systems for the storage nodes
- B. HPE Apollo 4530 Systems for co-located compute and storage nodes
- C. HPE Moonshot 1500 Systems with m710 cartridges for the compute nodes and HPE
Apollo 4200 Systems for the storage nodes - D. HPE Moonshot 1500 Systems with m700 cartridges for co-located compute and storage nodes
Answer: C
NEW QUESTION 38
An architect is planning an HPE Moonshot System deployment. The architect plans to individually connect each management module to the management network. The customer then informs the architect that this plan requires too many 1GbE ports per rack for the data center infrastructure.
What should the architect do to meet the customer's needs, while still allowing iLO access to the HPE Apollo Systems?
- A. Enable the iLO REST API on each HPE ProLiant XL server.
- B. Ensure that HPE Advanced Power Manager aggregates iLO acccess, as well as provides other rack and power management benefits.
- C. Add one Innovation Zone module on each chassis to connect to HPE Insight Cluster Management Utility (CMU).
- D. Have iLO traffic share the same ports as production traffic and inform the data center administrators that they should use VLANs to separate the two types of traffic.
Answer: D
NEW QUESTION 39
An architect needs to determine whether a customer is ready to move to a software-defined data center (SDDC).
Which additional information should the architect obtain from the customer to verify this?
- A. whether they have standardized on a single vendor
- B. whether they have a workplace mobility plan implemented
- C. whether they have a management and automation solution implemented
- D. whether they have a disaster recovery plan implemented
Answer: C
NEW QUESTION 40
A customer needs a server infrastructure update for its Hadoop HBase solution.
The HBase maximum dataset size will be 120TB.
To host HBase, the architect is planning three HPE Moonshot 1500 chassis that are fully populated with cartridges.
The populated chassis provide the following in total:
Which aspect or the design is under provisioned and is likely to cause performance to be degraded to one-tenth or even one-hundredth of its potential?
- A. amount of RAM
- B. number of cores per processor
- C. amount of local storage on SSDs
- D. number of processors
Answer: C
NEW QUESTION 41
A customer's business critical application server, which is managed by HPE OneView, recovered from an automatic ASR reboot. HPE Support requests an Active Health System log.
What should the customer use to access the log while the server is online?
- A. HPE OneView
- B. Intelligent Provisioning
- C. UEFI Bios
- D. iLO
Answer: D
Explanation:
Explanation
NEW QUESTION 42
An architect proposes an HPE Moonshot solution with three HPE Moonshot 1500 Chassis as follows:
- one chassis with 30 m710 cartridges
- two chassis with 30 m800 cartridges each
The customer wants to change the solution to use two HPE Moonshot 1500 chassis as follows:
- one chassis with 30 m710 cartridges and 15 m800 cartridges
- one chassis with 45 m800 cartridges
What should the architect explain to the customer?
- A. Mixing different models of cartridges in the same chassis is not supported
- B. Mixing different models of cartridges requires the customer to use an HPE Moonshot Provisioning Manager (MPM)
- C. A chassis can support both m710 and m800 cartridges, but the m710 cartridge adapters will operate at
1Gbps rather than 10Gbps - D. A chassis can support both m710 and m800 cartridges, but the m710 cartridges will not be able to use their accelerators
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 43
An architect reviews an HPE Apollo 6000 design and finds that there are plans for redundant iLO connections on each HPE Apollo 6000 chassis to a pair of top-of-rack switches. These switches are set up as individual switches connected to a single core.
Which configuration change should the architect recommend to ensure a loop free management topology?
- A. Replace the top-of-rack switches with HPE Advanced Power Management Kits.
- B. Configure MAD between the top-of-rack switches.
- C. Remove one iLO connection from each HPE Apollo 6000 chassis.
- D. Configure IRF between the top-of-rack switches.
Answer: D
NEW QUESTION 44
A customer has a large Oracle-based ERP solution that runs on HPUX and multiple rx2800 i2 servers. The customer plans to move to an open source solution to reduce operating expenses. The customer needs the ability to deliver incremental capacity and needs to avoid incremental Oracle licensing costs.
Which HPE Server solution will help meet the customer's needs?
- A. HPE Superdome X
- B. HPE BladeSystem c7000 with BL460G Gen9 Servers
- C. HPE Apollo 6000 System
- D. HPE Apollo 4500 System
Answer: A
Explanation:
Explanation/Reference:
Reference https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA6-5294ENN.pdf (page 5)
NEW QUESTION 45
During a data center transformation discussion, an architect obtains the following customer information:
* core business depends heavily on advanced data modelling techniques that has been developed internally
* infrastructure in use takes anywhere from 10 hours to five days to complete complex data models for the various development teams that rely on them
* has a proud reputation as an "environmentally friendly" Fortune 500 company
* increasing productivity of its development team is the highest priority Which large scale HPC solution should the architect recommend to help the customer achieve its transformation goals?
- A. HPE Apollo 2000
- B. HPE Apollo 6000
- C. HPE Apollo 8000
- D. HPE Integrity Superdome X
Answer: A
NEW QUESTION 46
An architect needs to design a solution for a customer that stores all data on third-party
NAS storage, and that does not yet have a database solution. The new HPE-based solution must be optimized for data mining.
How can the current data stored on the NAS be used for data mining?
- A. using the database application import functionality to migrate the data from the NAS to block-level storage for processing
- B. attaching the database directly to the NAS storage by using a Fibre Channel Host Bus Adapter and by using the NAS for all DB tables
- C. connecting the database to the NAS as main storage by using a TOE Host Bus Adapter
- D. attaching the database directly to the NAS storage by using an iSCSI Host Bus Adapter and by using the NAS for all DB tables
Answer: A
NEW QUESTION 47
An architect is proposing a solution that has two HPE Moonshot 1500 chassis, each of which is full of m700 cartridges. The customer needs the solution to quickly deploy the OS to cartridges, back up a golden node image, and clone the image.
The customer is concerned about cost and is not interested in managing or monitoring performance of the solution.
Which solution meets these requirements?
- A. HPE Intelligent Provisioning (IP)
- B. HPE Insight Control server provisioning (ICsp)
- C. HPE Insight Cluster Management Utility (CMU)
- D. HPE OneView 2.0
Answer: C
Explanation:
Explanation
NEW QUESTION 48
What is one advantage of hard partitioning, or nPartitioning, for HPE Integrity Superdome X as compared to virtual partitioning?
- A. It provides greater reliability because partitions are electronically isolated
- B. It enables HPE Helion CloudSystem to deploy VMs to the Integrity Superdome X System
- C. It allows a single blade to support more guest operating systems
- D. It permits the flexibility to assign different processor cores on the same processors to different partitions
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 49
An architect is writing a response to a Request for Proposal (RFP). The customer has requested financial information on the monetary amount by which assets are valued in business records.
Which value does the architect need to consider?
- A. net investment value (NIV)
- B. net book value (NBV)
- C. total cost of acquisition (TCA)
- D. fair market value (FMV)
Answer: B
Explanation:
References:
NEW QUESTION 50
......
Penetration testers simulate HPE0-S22 exam: https://www.passtorrent.com/HPE0-S22-latest-torrent.html