[Mar 28, 2023] Get to the Top with 2V0-41.20 Practice Exam Questions
Use Real 2V0-41.20 Dumps Free Sample Questions and Practice Test Engine
Difficulty in Writing Professional VMware NSX-T Data Center 2V0-41.20 Exam
One of the most important certifications that applicants may have on their resume is Professional VMware NSX-T Data Center 2V0-41.20 certified. One of the key problems faced by most candidates is to choose the right research materials for their exam preparation since they use the internet to find too much data that makes it difficult for them to trust, which would be helpful for them.
Professional VMware NSX-T Data Center 2V0-41.20 exam is not an easier one and can turn out to be a very difficult certification if not well prepared. If professionals give 2V0-41.20 practice exams, they can better prepare for the exam while having understanding of the exam format and types of questions asked.
Applicants may, however, clear the exam with the right concentration and the right preparation material. PassTorrent have the most up-to-date learning materials, having a fair understanding of the question trend being asked in real certification with the help of these 2V0-41.20 practice exams aspirants. For all of the changes in the course, the experts check PassTorrent 2V0-41.20 exam dumps. PassTorrent also include practise testing, which proves to be an outstanding forum for testing the information gained. Refer to the links down below to access the study materials.
NEW QUESTION 41
Which CLI command would an administrator use to allow syslog on an ESXi transport node when using the esxcli utility?
- A. esxcli network firewall ruleset set -a -e false
- B. esxcli network firewall ruleset set -r sysloq -e false
- C. esxcli network firewall ruleset set -r syslog -e true
- D. esxcli network firewall ruleset -e syslog
Answer: C
Explanation:
Reference: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/2.2/nsxt_22_troubleshoot.pdf
NEW QUESTION 42
An NSX administrator has been tasked with deploying a NSX Edge Virtual machine through an ISO image.
Which virtual network interface card (vNIC) type must be selected while creating the NSX Edge VM allow participation in overlay and VLAN transport zones?
- A. Flexible
- B. VMXNET2
- C. VMXNET3
- D. e1000
Answer: C
NEW QUESTION 43
Refer to the exhibit.
Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?
- A. 1:1 NAT
- B. SNAT
- C. DNAT
- D. Reverse NAT
Answer: B
NEW QUESTION 44
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:
Which two commands must be executed to check BGP neighbor status? (Choose two.)
- A. sa-nsxedge-01(tier0_sr)> get bgp neighbor
- B. sa-nsxedge-01(tier1_sr)> get bgp neighbor
- C. sa-nsxedge-01(tier0_dr)> get bgp neighbor
- D. vrf 4
- E. vrf 1
- F. vrf 3
Answer: A,F
NEW QUESTION 45
When running nsxcli on an ESXi host, which command will show the Replication mode?
- A. get logical-switch <Logical-Switch-UUID>
- B. get logical-switches
- C. get logical-switch <Local-Switch-UUID> status
- D. get logical-switch status
Answer: A
Explanation:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html#get%20logical-switch%20%3Clogical-switch-id%3E%202
NEW QUESTION 46
Where are Distributed Firewall logs containing access decisions stored?
- A. Hypervisor transport node
- B. NSX API
- C. NSX Edge
- D. NSX Manager
Answer: A
Explanation:
https://docs.vmware.com/en/VMware-NSX-Data-Center-for-vSphere/6.4/com.vmware.nsx.logging.doc/GUID-6F9DC53E-222D-464B-8613-AB2D517CE5E3.html
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-D57429A1-A0A9-42BE-A299-0C3C3546ABF3.html
NEW QUESTION 47
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN- backed logical switch?
- A. Loopback Router Port
- B. Downlink interface
- C. Service interface
- D. VLAN Uplink
Answer: C
NEW QUESTION 48
Which two choices are prerequisites to configure NSX-T on VDS? (Choose two.)
- A. MTU 1500
- B. MTU 1400
- C. MTU 1600
- D. vSphere Distributed Switch 6.5
- E. vSphere Distributed Switch 7.0
Answer: C,E
Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-BA34FB2A-6780-41C5-B895-F37E5A7B7BAE.html
NEW QUESTION 49
Which tool injects packets and provides various observation points along the packet's path between two NSX-T managed objects?
- A. Traceflow
- B. IPFIX
- C. Port Mirroring
- D. SPAN mirrors
Answer: A
Explanation:
Reference:
2Fnsxt_21_admin.pdf&usg=AOvVaw2DqQfqPkhzWQfiJP2SgNbO (213)
NEW QUESTION 50
An NSX administrator is reviewing syslog and notices that Distributed Firewall Rules hit counts are not being logged. What could cause this issue?
- A. Syslog is not configured on the NSX Manager
- B. Distributed Firewall Rule logging is not enabled
- C. Zero Trust Security is not enabled
- D. Syslog is not configured on the ESXi transport node
Answer: B
NEW QUESTION 51
An NSX administrator has deployed an NSX Edge on a bare-metal server.
Which command registers the NSX Edge with the NSX Manager?
- A. join cluster <nsx-cluster-IP> username root password <root-password> thumbprint
<nsx-manager-thumbprint> - B. join policy-manager <nsx-manager-ip> username root password <root-password> thumbprint
<nsx-manager-thumbprint> - C. join management-plane <nsx-nanager-ip> username admin password <admin-password> thumbprint
<nsx-manager-thumbprint> - D. join management-cluster <nsx-cluster-IP> username admin password <admin- password> thumbprint <nsx-manager-thumbprint>
Answer: C
NEW QUESTION 52
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?
- A. vmkping ++netstack=vxlan-d -s 1572 <destination IP address>
- B. esxcli network diag ping -I vmk0 -H <destination IP address>
https://kb.vmware.com/s/article/1003728 - C. esxcli network diag ping -H <destination IP address>
- D. vmkping ++netstack=geneve -d -s 1572 <destination IP address>
Answer: A
NEW QUESTION 53
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. Route Distribution
- B. Graceful Restart
- C. Local AS
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
* Local AS
* Graceful restart
* Graceful restart timer
* Graceful restart stale timer
* Multipath relax
Inter-SR iBGP is not supported in VRF gateways.
BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF. - D. BGP Neighbors
- E. Route Aggregation
Answer: D,E
NEW QUESTION 54
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?
- A. vmkping ++netstack=vxlan-d -s 1572 <destination IP address>
- B. esxcli network diag ping -I vmk0 -H <destination IP address>
- C. esxcli network diag ping -H <destination IP address>
- D. vmkping ++netstack=geneve -d -s 1572 <destination IP address>
Answer: A
Explanation:
https://kb.vmware.com/s/article/1003728
NEW QUESTION 55
Which two choices are prerequisites to configure NSX-T on VDS? (Choose two.)
- A. MTU 1500
- B. MTU 1400
- C. MTU 1600
- D. vSphere Distributed Switch 6.5
- E. vSphere Distributed Switch 7.0
Answer: C,E
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-BA34FB2A-6780-41C5-B895-F37E5A7B7BAE.html
NEW QUESTION 56
What is the most restrictive NSX-T built-in role which will allow a user to apply configuration changes on a NSX Edge?
- A. Cloud Service Administrator
- B. Network Operator
- C. Network Engineer
- D. NSX Administrator
Answer: C
NEW QUESTION 57
An NSX Administrator has created a segment named WEB-LS from the NSX UI and noticed the segment is not realized on the KVM Transport node.
What are two possible causes for this issue? (Choose two.)
- A. Since the Compute Manager is disconnected in NSX UI, the WEB-LS segment will not be realized on the KVM Transport Node.
- B. The virtual machines running on the KVM Transport Node are not connected to the VDS.
- C. The KVM Transport node has hardware issues and will not realize the WEB-LS Segment.
- D. The virtual machines running on the KVM Transport Node are connected to the WEB-LS segment, but are in Powered Off state.
- E. The virtual machines running on the KVM Transport Node are not connected to the WEB-LS Segment.
Answer: A,C
NEW QUESTION 58
An NSX administrator is planning to deploy a multi-tier routing topology in their NSX-T Data Center environment to provide north-south connectivity for the VMs.
Which routing component must be deployed?
- A. Layer 2 Gateway
- B. Tier-0 Gateway
- C. Edge Services Gateway
- D. Tier-1 Gateway
Answer: B
NEW QUESTION 59
An NSX administrator has deployed an NSX Edge on a bare-metal server.
Which command registers the NSX Edge with the NSX Manager?
- A. join management-plane <nsx-nanager-ip> username admin password <admin-password> thumbprint <nsx-manager-thumbprint>
- B. join cluster <nsx-cluster-IP> username root password <root-password> thumbprint
<nsx-manager-thumbprint> - C. join policy-manager <nsx-manager-ip> username root password <root-password> thumbprint <nsx-manager-thumbprint>
- D. join management-cluster <nsx-cluster-IP> username admin password <admin- password> thumbprint <nsx-manager-thumbprint>
Answer: A
NEW QUESTION 60
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
- A. virsh dumpxml <VM Name> | grep interfaceid
- B. virsh get-interface <VM Name>
- C. virsh show <VM Name> | grep interfaceid
- D. virsh list-interface <VM Name>
Answer: A
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 61
Which network virtualization technologies can be used with an Ethernet VPN (EVPN) deployment in NSX-T Data Center? (Choose two.)
- A. Virtual Extensible Local Area Network (VXLAN)
- B. Multiprotocol Label Switching (MPLS)
- C. Open Shortest Path First (OSPF)
- D. Multiprotocol Border Gateway Protocol (MP-BGP)
- E. Virtual Routing and Forwarding (VRF)
Answer: A,D
NEW QUESTION 62
......
Pass VMware 2V0-41.20 exam - questions - convert Tets Engine to PDF: https://www.passtorrent.com/2V0-41.20-latest-torrent.html