Latest 2022 Realistic Verified CWDP-303 Dumps - 100% Free CWDP-303 Exam Dumps
Get 2022 Updated Free CWNP CWDP-303 Exam Questions and Answer
More about CWDP-303 Exam
CWDP-303 test regards the management of the entire lifecycle of WLAN design. This includes the definition, design, deployment, and diagnosis. Thus, tasks to undertake include gathering essential information as well as requirements, the creation of design, network implementation, and validation and optimization to ensure the accomplishment of the objectives. Testing, in particular, will encompass 60 questions to accomplish in 1.5 hours. Also, the test will have MCQs only with the language of the delivery being English. Getting certified means you've reached 70%. Finally, such an exam is going for $275.
How much CWDP-303 Exam Cost
The price of the CWDP-303 exam is $275 USD.
NEW QUESTION 20
When surveying an existing WLAN infrastructure for a possible redesign, you use two Wi-Fi USB adapters to collect RSSI data and two USB spectrum analysis adapters to collect RF spectrum data. Since your laptop doesn't have enough USB ports, you use a 4-port powered USB 3.0 hub. What issues could be caused by the use of USB 3.0 that will impact your site survey?
- A. It does not give you enough bandwidth to collect data coming from all of the adapters.
- B. It does not give you enough power for all four of your adapters.
- C. It generates noise in the 2.4 GHz band, giving you a false perception of the noise floor.
- D. It generates noise in the 5 GHz band, giving you a false perception of the noise floor.
Answer: C
Explanation:
Explanation
Explanation/Reference: https://support.ekahau.com/hc/en-us/articles/235437007-USB-3-0-Causing-High-Noise-Floor-and- Its-Impact-on-Site-Surveys
NEW QUESTION 21
When doing some frame capturing over the air during a voice call, you realized that frames on the downlink (from the AP to the client) direction are not being transmitted with the correct UP value for voice frames, but on the uplink (from the client to the AP) direction are being transmitted correctly. What's the cause of this issue?
- A. Faulty antenna on the AP
- B. Somewhere on the wired network QoS markings aren't being trusted
- C. AP is not receiving enough PoE, thus not using QoS features
- D. Bad client driver
Answer: C
NEW QUESTION 22
You're about to deploy an Enterprise-class VoWLAN infrastructure. You need to ensure that QoS is properly configured throughout the network. What Access Category (AC) should voice frames/packets use?
- A. AC_BK
- B. AC_VI
- C. AC_BE
- D. AC_VO
Answer: D
Explanation:
Explanation/Reference: http://support.huawei.com/enterprise/docinforeader!loadDocument1.action?
contentId=DOC1000019455&partNo=10022
NEW QUESTION 23
What is the minimum PoE budget needed on a switch to support 6 (six) APs that can only be powered using IEEE 802.3at if no other details are provided?
- A. 180 W
- B. 60 W
- C. 240 W
- D. 320 W
Answer: B
NEW QUESTION 24
A museum wants to offer Wi-Fi to its visitors. One of their requirements is to have the APs blend into the design of the museum. What should you do to meet this requirement?
- A. Place the APs in between walls and I-beams
- B. Lock the AP inside of a metal box
- C. Use an 802.11b AP, so it looks old enough to be in a museum
- D. Use a plastic cover that could blend in with the environment
Answer: D
Explanation:
Explanation/Reference:
Reference: https://www.webmasterworld.com/webmaster_hardware/4263823.htm
NEW QUESTION 25
During your first pre-deployment meeting with the deployment team, you hand out the full design documentation to all of them. What's your primary goal during this meeting?
- A. To explain how Wi-Fi works.
- B. To justify the budget.
- C. To explain design decisions and ensure understanding of design documents.
- D. To discuss AP functionality.
Answer: C
NEW QUESTION 26
You are conducting a physical site survey where heavy machinery is repaired. What is a common item required specifically for this type of survey?
- A. Low gain antennas
- B. Indoor APs
- C. Low power APs
- D. Personal Protective Equipment (PPE)
Answer: D
NEW QUESTION 27
Which type of authentication and encryption method is mandatory for Voice Enterprise certified devices as specified by the Wi-Fi Alliance?
- A. WPA2/AES Personal
- B. WPA2/TKIP Enterprise
- C. WPA2/AES Enterprise
- D. WPA/TKIP Personal
Answer: A
NEW QUESTION 28
What document is typically created to launch a project?
- A. Budget
- B. Project Charter
- C. Work Breakdown Structure
- D. Bill of Materials
Answer: B
NEW QUESTION 29
After designing a WLAN infrastructure using predictive design software. What's the best way to validate the predictive design in the physical space before deployment, if time and budget allow for it?
- A. Use a client device positioned where the APs will be installed and measure the signal from the client device.
- B. Perform an AP-on-a-Stick survey using AP locations based upon the predictive design to confirm each AP's placement.
- C. Deploy all of the APs as they're shown in the predictive design and perform a passive site survey.
- D. Deploy all of the APs as they're shown in the predictive design and perform an active site survey.
Answer: B
Explanation:
Explanation/Reference: https://vectorusa.com/steps-to-designing-and-deploying-wireless-lan/
NEW QUESTION 30
A controller-based WLAN infrastructure has its controller on a different subnet than its APs. What device must be used to enable any communication between the Controller and the APs?
- A. PoE Layer 2 switch
- B. NTP server
- C. Router
- D. Wireless bridge
Answer: C
Explanation:
Explanation/Reference:
Reference: https://www.speaknetworks.com/cisco-wireless-controller-configuration/
NEW QUESTION 31
What are the deliverables to your customer after successfully implementing a WLAN infrastructure?
- A. Project Charter
- B. Nothing is required. The implemented WLAN was deliverable
- C. Digital or physical assets, guides, floorplans and configuration documents
- D. Facility blueprints
Answer: C
NEW QUESTION 32
You're preparing to perform a site survey for a company that processes meat. Some areas are restricted due to high-security. What do you have to do in order to proceed with the site survey?
- A. Ensure that you and your team are using food industry approved USB adapters for the survey.
- B. Gain meat processing access certification from the FDA.
- C. Just begin the survey, they will understand
- D. Gain appropriate access and clearance to perform the site survey.
Answer: D
NEW QUESTION 33
What kind of site survey helps you identify if roaming is working as designed?
- A. Spectrum analysis walkthrough
- B. Passive
- C. Predictive
- D. Active
Answer: B
Explanation:
Explanation/Reference: http://revolutionwifi.blogspot.com/2013/
NEW QUESTION 34
In what circumstance would you not enable DFS channels on a WLAN infrastructure?
- A. In an airport
- B. In any office complex
- C. In any stadium
- D. In any home office
Answer: A
NEW QUESTION 35
Your customer's 802.11n laptops are not able to see the SSID in the 5 GHz band in the conference room.
When doing a walkthrough using one of these laptops, you confirm that it is unable to see the SSID in the 5 GHz band in the conference room. When using your own 802.11 ac laptop, you're able to see the SSID. What is the most likely cause of this problem?
- A. The AP is on channel 144
- B. The AP is configured to use channel 36
- C. Their laptops are SISO clients
- D. The customer laptop does not support Transmit Beamforming
Answer: D
NEW QUESTION 36
After designing a WLAN infrastructure using predictive design software. What's the best way to validate the predictive design in the physical space before deployment, if time and budget allow for it?
- A. Use a client device positioned where the APs will be installed and measure the signal from the client device.
- B. Perform an AP-on-a-Stick survey using AP locations based upon the predictive design to confirm each AP's placement.
- C. Deploy all of the APs as they're shown in the predictive design and perform a passive site survey.
- D. Deploy all of the APs as they're shown in the predictive design and perform an active site survey.
Answer: B
NEW QUESTION 37
What service must be implemented on your customers' network to authenticate users against an LDAP database prior to access to the WLAN infrastructure being granted?
- A. RADIUS
- B. NTP
- C. SFTP
- D. TLS
Answer: A
NEW QUESTION 38
In addition to a copy of your design, which tools should you use to ensure the installation team deploys APs where you have them designed to be located?
- A. RF spectrum analyzer and packet capturing software
- B. Camera and marking tools
- C. GPS and a map
- D. Ladder and a pen
Answer: C
NEW QUESTION 39
Which document provided to your customer should include all devices and parts that are going to be used during the deployment of their WLAN infrastructure?
- A. BoM
- B. Project plan
- C. SoW
- D. Design report
Answer: A
Explanation:
Explanation/Reference: https://searcherp.techtarget.com/definition/bill-of-materials-BoM
NEW QUESTION 40
You have performed a validation site survey after deploying a WLAN infrastructure that is an All-Wireless- Office. One specific application of your customer is experiencing delay when using the application after moving from wired connectivity. After your validation, you realized that all APs are using 80 MHz channel- widths instead of 20 MHz on the 5 GHz band, as it was designed. What can be done to resolve the delay on this application?
- A. Power-off half of the APs to reduce CCI and keep 80 MHz channel-widths
- B. Reconfigure to use 20 MHz channel-widths, so reuse of the frequency is more effective
- C. APs should be using 160 MHz channel-widths to get more throughput
- D. Add more APs using 80 MHz channel-widths
Answer: B
NEW QUESTION 41
After deploying a 5 GHz-only WLAN infrastructure in the USA, using 20 MHz channel-widths and all 25 available channels, one of the managers of the company brings his 802.11n tablet to the office to test the Guest SSID. While testing, there were several spots where we would get poor RSSI (below -80dBM) or none at all. You checked the WLAN infrastructure and all APs are up and running and you've validated coverage after deployment. What is causing this issue?
- A. His tablet doesn't support the 5 GHz band
- B. His tablet only supports a 40 MHz channel-width
- C. His tablet doesn't support MU-MIMO
- D. His tablet does not support one or more of the 5 GHz channels
Answer: C
NEW QUESTION 42
When deploying a new WLAN infrastructure using PoE to power the APs, you realize that a known good AP is not powering up. You use the same cable to connect your laptop and connect without any trouble. What is the most likely reason the AP did not power up?
- A. Spanning-tree convergence
- B. Layer 3 routing
- C. Missing AP licenses in the controller
- D. Lack of PoE budget on the switch
Answer: D
NEW QUESTION 43
You're about to deploy an Enterprise-class VoWLAN infrastructure. You need to ensure that QoS is properly configured throughout the network. What Access Category (AC) should voice frames/packets use?
- A. AC_BK
- B. AC_VI
- C. AC_BE
- D. AC_VO
Answer: D
Explanation:
Explanation
Explanation/Reference: http://support.huawei.com/enterprise/docinforeader!loadDocument1.action?
contentId=DOC1000019455&partNo=10022
NEW QUESTION 44
When deploying a new WLAN infrastructure using PoE to power the APs, you realize that a known good AP is not powering up. You use the same cable to connect your laptop and connect without any trouble.
What is the most likely reason the AP did not power up?
- A. Spanning-tree convergence
- B. Layer 3 routing
- C. Missing AP licenses in the controller
- D. Lack of PoE budget on the switch
Answer: D
NEW QUESTION 45
......
CWDP-303 Dumps PDF and Test Engine Exam Questions: https://www.passtorrent.com/CWDP-303-latest-torrent.html