[Jan 17, 2024] HPE6-A80 PDF Recently Updated Questions Dumps to Improve Exam Score
HPE6-A80 Dumps Full Questions with Free PDF Questions to Pass
HP HPE6-A80 certification exam, also known as the Aruba Certified Design Expert Written exam, is designed to evaluate the skills and knowledge of individuals in the field of network design using Aruba products and solutions. Aruba Certified Design Expert Written Exam certification is aimed at network architects, engineers, and consultants who are involved in designing complex enterprise networks, including wired, wireless, and remote access solutions. HPE6-A80 exam covers a wide range of topics, including network architecture and design principles, security, scalability, and troubleshooting.
HPE6-A80 certification exam is intended for network professionals who have experience in designing and deploying Aruba WLAN networks. HPE6-A80 exam covers a wide range of topics including network design, security, troubleshooting, and optimization. Candidates who pass HPE6-A80 exam will be able to demonstrate their expertise in designing complex wireless networks that meet the requirements of business-critical applications.
To prepare for the HPE6-A80 exam, candidates should have a strong foundation in networking principles and should have experience working with Aruba networks. They should also be familiar with the Aruba network design process and should be able to apply this process to different scenarios. There are many resources available to help candidates prepare for the exam, including study guides, practice exams, and online courses.
NEW QUESTION # 16
Refer to the exhibit.
A museum wants to add full S02.11ax wireless coverage across the building, which is about 210 feet (64 m) by 330 feet (100 m). The museum has 15-foot (4.6 m) ceilings and stone interior walls. The network needs to support up to 600 wireless guest devices The exhibit also shows a preliminary plan tor AP locations, me museum has eight Ethernet drops in the lobby and girt stop, but has otherwise not been wired.
What is one recommendation that the architect should make to ensure a successful deployment?
- A. Add about 10 APs to achieve adequate density
- B. Add a wiring closet closer to the north side.
- C. Use directional antennas to avoid lost signal.
- D. Use at least CATS cable to connect to the APs.
Answer: B
NEW QUESTION # 17
A customer needs an AP for an indoor lecture nail mat is about 82 feet (25 m) by 32 feet (25 m) and has 300 seats. The ceiling height is 15 feet The expected take rate is 100 percent.
The network needs to support the student laptops, which all support S02.Hac and some support 802.11ax standard.
The customer would like to obtain as many usable cells as possible with as few APs as possible.
Which of these APs meets the requirements?
- A. AP-S15
- B. AP-535
- C. AP-345
- D. AP-335
Answer: B
NEW QUESTION # 18
A customer has an Aruba wireless netwofK with:
* Two 7205 Mobility Controllers (MCs) in a cluster - Each MC must be able to support the complete network in the case of an MC failure
* 250 APs. which support a total of 7.500 devices
* A virtual CxQCQ ClearPass appliance with 1QK Access licenses
* An MM-HW-1K appliance
The customer is interested in an upgrade to Aruba CX Switches, primarily to benefit from the per-user tunneled node feature. The customer requires support for 2500 ports, and 95 percent of wined endpoints will use tunneled node.
Which change to the existing solution should the architect explain?
- A. A separate ClearPass virtual appliance will be required to integrate with the AQS-Switches
- B. The clustering feature will need to be disabled on the controllers, so that they can support tunneled node.
- C. A new controller will be required to support sufficient clients, including the wired ones.
- D. The Mobility Master will need more MM licenses to support the wired endpoints that use tunneled node.
Answer: B
NEW QUESTION # 19
A customer has critical wired endpoints. However, each endpoint has a single Ethernet connection to the network. The customer wants redundancy in the switch access layer to minimize the chances that an endpoint will lose this connection The architect plans to deploy two Aruba CX 6405 switches in the closet.
Which plan provides the greatest redundancy for this scenario?
- A. The 6405 switches are not in a vsF fabric, and have redundant power supplies but not redundant management modules.
- B. The 6405 switches are in a VSX fabric, and each has a redundant management module but not a redundant power supply.
- C. The 6405 Switches are in a VSF fabric, so the individual switches do not need redundant components.
- D. The 6405 switches are not in a VSX fabric, and have redundant power supplies and redundant management modules.
Answer: B
NEW QUESTION # 20
A customer has an existing Aruba wireless solution at their campus. This solution is shown in the exhibit.
The customer now wants to enhance seamless roaming and failover across the solution. The customer wants the least expensive solution that still meets the needs.
Which figure shows the correct changes to the solution to meet the new needs?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: C
NEW QUESTION # 21
A network architect needs to plan quality of service (QoS) for a hospital network.
Which of these applications should receive the highest priority?
- A. cloud-based scheduling software
- B. wireless voice communicator devices
- C. streaming IPTV in lobbies
- D. MRI image transfer
Answer: A
NEW QUESTION # 22
What is one piece of additional information architects should obtain from the customer before they design the wireless solution?
- A. the average number of users per loT device
- B. the power requirements for the wireless loT devices and security cameras
- C. the authentication and encryption capabilities for loT devices and security cameras
- D. the distance between the locations where cameras will be installed and the wiring closet on each floor
Answer: D
NEW QUESTION # 23
Refer to the exhibit.
The exhibit shows the design for an existing network. The customer intends to replace the current Core switches with two Aruba 8400 switches.
What are two points that the architect should ensure that the customer understands? (Select two.)
- A. The 8400 switches run different software than the 5400R switches.
- B. The 8400 switches cannot be monitored by AirWave.
- C. The 8400 switches have a smaller ARP table than the 540OR switches.
- D. The 8400 switches do not support VSF.
- E. The 8400 switches are fixed port switches.
Answer: A,C
NEW QUESTION # 24
Refer to the exhibit.
A stadium wants to deploy location-based services, including blue-dot wayfinding over a 200.000 square root (isr580 sq. m) are a. The custom past particular areas. The customer has selected a 1 year subscription.
The exhibit shows the BOM that the architect created in iris.
Which correction should the architect make?
- A. Add another campaign subscription.
- B. Change the campaign subscription to a Maps subscription.
- C. Add two Maps subscriptions.
- D. Remove one Blue Dot Nav subscription.
Answer: B
NEW QUESTION # 25
A company already has an Aruba wireless network The network currently consists of:
* oneMM-HW-1k
* two 7210 MCs in the network core
* two 721GMCsintheDMZ
* 200 AP-515S in Building 1 and Building 5
100 AP-515S each In Building 2r Building 3, and Building 4
The customer now wants to assess if it needs local Mobility controllers (MC) for any buildings:
- Building 1 is the main office building for the campus. It supports the highest number of APs. It connects to the network core without an aggregation layer.
* Building 2 is further away from the Building i. and no roaming is provided between it and the other buildings its access layer connects to the network cone with a pair of Aruba CX 6300M aggregation switches.
* Building 3 is further away from the other buildings, it connects to the network core without an aggregation layer.
The Guest SSID traffic should be tunnelled to the DMZ controllers
' Building 4 has its own local datacenter and Internet connection. The company would like it to be able to operate completely autonomously if its aggregation layer loses connectivity with the core.
* Building 5 is further away from the other buildings, it connects to the network core without an aggregation layer.
This building has been assigned to a partner that would like to manage a dedicated SS1D using the shared AP infrastructure.
In which two buildings should the network architect plan local mobility controllers (MCs)? (Select two)
- A. Building 4
- B. Building 1
- C. Building 2
- D. Building 5
- E. Building 3
Answer: B,E
NEW QUESTION # 26
Refer to the exhibit.
A customer has an existing network with ArubaOS switches, Aruba 7205 controller, and 802.11ac APs. The customer needs a wired upgrade for their campus network and wireless upgrade with 802,11ax APs and would like to get all the functions of AP.
The customer has one building with 3 floors with the following wired devices,
* 200 VOIP phones
* 8 printers
* security cameras
The architect plans to propose 75 AP-535s.
The security cameras are a high definition pan-tilt-zoom with heaters for harsh environments that require more than 45 W to function, Which exhibit shows an access switch mat meets the customer needs?
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option C
- D. Option D
Answer: D
NEW QUESTION # 27
Refer to the exhibit.
This warehouse has the dimensions shown in the exhibit. The warehouse is 20 feet (6 m) high up to a steel railing on the celling. The shelves are about 16 feet (5m) high, and they hold large containers filled with fluid and metal equipment.
The customer needs consistent wireless coverage throughout the warehouse, mostly to support the tablets that employees use to run Inventory tracking and other applications. The warehouse staff works in shifts of 20.
The architect has selected AP-515S. About how many APs should the architect propose?
- A. about 13-16
- B. about 6-4
- C. about 23-32
- D. about 6-8
Answer: D
NEW QUESTION # 28
A mall requires a wireless network upgrade to 802 -Max The company that owns the mall wants to provide the APs for the entire mall. However, several of the larger national chain retailers with spaces in the mall want to offer wireless services with their own SSIDs.
These individual retailers also have their own wireless guest services and wireless client devices They have their own corporate infrastructure and want to handle all of this wireless traffic on their own, including terminating the traffic on their own controllers. The mall requires redundancy for its services, out the retailers do not.
Which plan for mobility controllers (MCs) and mobility master (MW) meets the needs of this scenario?
- A. two MCs for the mall company and one MC for each retailer with its own SSIDs, all controlled by the same pair of MMs
- B. two MCs for the mall company and for all of the retailers, both controlled by the same pair of MMs
- C. a pair of MMs for the mall company, but not MCs: MMs control one MC for each retailer with its own SSIDs
- D. two MCs for the mail company controlled by a pair of MMS; one standalone MC for each retailer with its own SSIDS
Answer: C
NEW QUESTION # 29
Refer to the exhibit.
A customer needs a wired network upgrade and has complained about performance issues. The architect collected information about traffic now on several switch ports in different locations across the network, and the results are shown in the exhibit. Each of these ports is a 1Gbps port.
What can the architect conclude?
- A. None of these ports show any periods of congestion
- B. Port 3 snows periods of congestion; other ports are not congested.
- C. All of the ports show serious congestion
- D. Port 1 shows periods of congestion; other ports are not congested.
Answer: A
NEW QUESTION # 30
Refer to the exhibit.
A hotel needs a wireless solution, i he hotel has 802.3af switches.
The architect has selected the 505H Series, controlled by a local MC as the best choice The 5QoH series will need to power a connected phor which have only a single Ethernet port. The architect has created the BOM shown in the exhibit. (Note that this portion of the BOM does not inc Which correction should the architect make?
- A. Upgrade to PoE+ switches.
- B. Change the 5Q5H to the 3Q3HR model.
- C. Propose new direct power source for phone.
- D. Remove the mounting adapters.
Answer: C
NEW QUESTION # 31
......
100% Updated HP HPE6-A80 Enterprise PDF Dumps: https://www.passtorrent.com/HPE6-A80-latest-torrent.html