Guaranteed Success in CCNP Collaboration 350-801 Exam Dumps
Cisco 350-801 Daily Practice Exam New 2024 Updated 390 Questions
Difficulty in Attempting Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
There are two main types of resources for preparation of certification exams first there are the study guides and books that are detailed and suitable for building knowledge from ground up then there are video tutorials and lectures that can somehow ease the pain of through study and are comparatively less boring for some candidates yet these demand time and concentration from the learner.
Smart Candidates who want to build a solid foundation in all exam topics and related technologies usually combine video lectures with study guides to reap the benefits of both but there is one crucial preparation tool as often overlooked by most candidates the practice exams. CISCO 350-801 practice exams and CISCO 350-801 practice exams are a great way to prepare for this exam. Practice exams are built to make students comfortable with the real exam environment. Statistics have shown that most students fail not due to that preparation but due to exam anxiety the fear of the unknown.
PassTorrent expert team recommends you to prepare some notes on these topics along with it don't forget to practice 840-450 Exam exam dumps which had been written by our expert team, Both these will help you a lot to clear this exam with good marks.
NEW QUESTION # 57
A collaboration engineer must optimize the dial plan within Cisco UCM. There are multiple remote sites. And each site has its own route patterns and local gateways. What should the engineer do on the cisco UCM to optimize the dial plan?
- A. Create a centralized dial plan with a Cisco UCM Session Management Edition cluster or a Cisco gatekeeper.
- B. Leverage Cisco UCM Express as SRST so the phones can have more features of each remote site
- C. Implement ILS with GDPR so the dial plan can dynamically replicate across clusters.
- D. Configure a Standard Local Route Group to use a single route pattern for all calls within the cluster.
Answer: C
NEW QUESTION # 58
Refer to the exhibit.
When making a call to a MRA client, what are the combinations of protocol on each of the different sections A-B-C?
- A. SIP TLS (A) +SIP TLS (B) +SIP TLS (C)
- B. SIP TCP/TLS (A) + SIP TLS (B) + SIP TLS (C)
- C. SIP TCP/TLS +SIP TCP/TLS (B) + SIP TCP/TLS (C)
- D. IP TCP/TLS(A) +SIP TCP/TLS (B) +TLS (C)
Answer: B
NEW QUESTION # 59
Which action prevent toll fraud in Cisco Unified Communication Manager?
- A. Implement toll fraud restriction in the Cisco IOS router
- B. Implement route patterns in Cisco Unified CM
- C. Configure ad hoc conference restriction
- D. Allow off-net to off-net transfer
Answer: C
NEW QUESTION # 60
Refer to the exhibit. This INVITE is sent to an endpoint that only supports G.729.
What must be done for this call to succeed?
- A. Add a transcoder that supports G.711ualw and G.729.
- B. ADD a media termination point that supports G.711ulaw and G.729.
- C. Noting: both sides support G.729.
- D. Nothing: both sides support payload type 101.
Answer: A
NEW QUESTION # 61
What are two functions of a dial-plan? (Choose two.)
- A. call recording
- B. ring cadence
- C. digit manipulation
- D. calling privileges
- E. endpoint features
Answer: C,D
NEW QUESTION # 62
Refer to the exhibit.
An engineer verifies the configured of an MGCP gateway. The commands are already configured. Which command is necessary to enable MGCP?
- A. Device (config) # com-manager active
- B. Device (config)# mgcp
- C. Device(config)# ccm-manager enable
- D. Device(config)# mgcp enable
Answer: B
NEW QUESTION # 63
Which packet delay is the maximum supported between Cisco Unified Communications Manager nodes for clustering over WAN deployments?
- A. 80 ms round trip
- B. 150 ms round trip
- C. 40 ms round trip
- D. 510 ms round trip
Answer: A
NEW QUESTION # 64
An engineer must manually register an analog port with cisco UCM using the MGCP protocol. Which commands are required?
- A. Option B
- B. Option A
- C. Option D
- D. Option C
Answer: B
NEW QUESTION # 65
When setting a new primary DNS server in the Cisco UCM CLI what is required for the change to take affect?
- A. restart of TFTP service
- B. restart of CallManager service
- C. restart of the network service
- D. restart of DirSync service
Answer: C
NEW QUESTION # 66
Refer to the exhibit.
https://i.postimg.cc/C57TkczG/image.png
A call is falling to establish between two SIP Devices The called device answers with these SOP Which SOP parameter causes issue?
- A. The media stream is set to send only
- B. The RTP port is set to 0.
- C. The payload for G.711ulaw must be 18.
- D. The calling device did not offer a ptime value
Answer: B
Explanation:
a) The calling device did not offer a ptime value: The ptime value is used to specify the amount of time between each media packet. If the calling device does not offer a ptime value, the called device will use the default value of 20 milliseconds.
b) The media stream is set to sendonly: The media stream is set to sendonly when the called device is only able to send media packets, and not receive them. This is not a problem, and the call will still succeed.
c) The payload for G.711ulaw must be 18: The payload for G.711ulaw is the type of media packet that is used. The payload must be set to 18 for G.711ulaw, but this is not a problem, and the call will still succeed.
Explanation:
The RTP port is used to send and receive media packets during a call. If the RTP port is set to 0, the called device will not be able to send or receive media packets, and the call will fail.
The other options are not correct because:
NEW QUESTION # 67
Which two approaches are taken to implement CAC within Cisco UCM in full-mesh topology?
(Choose two.)
- A. device pool
- B. RSVP-enabled locations
- C. Audio Codec Preference List
- D. physical location
- E. location-based CAC
Answer: B,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmsys/CUCM_BK_ SE5FCFB6_00_cucm-system-guide-100/CUCM_BK_SE5FCFB6_00_cucm-system-guide-
100_chapter_01000.html
NEW QUESTION # 68
Refer to the exhibit. Which codec should an engineer select for a call made between `Dallas- REG` & `Austin-REG`?
- A. MP4A-LATM
- B. G.729
- C. G.711
- D. OPUS
Answer: B
NEW QUESTION # 69
When configuring Cisco Unified Communications Manager, which configuration enables phones to automatically register to a Cisco Unified Communications publisher when the connection to the subscriber is lost?
- A. Cisco Unified CM Group
- B. SRST
- C. Route Group
- D. Device Pool
Answer: A
NEW QUESTION # 70
After an engineer runs the utils ntp status command on the Cisco Unified Communications Manager publisher, the stratum value is 16. Which issue can the Cisco Unified CM cluster experience?
- A. Database replication is not synchronized on the Unified CM nodes.
- B. The date/time group an all phones default to the time zone of the engineer.
- C. Unified CM sends an NTPv4 packet.
- D. The cluster loses access to port 124 at the firewall.
Answer: A
NEW QUESTION # 71
Which datastore and protocol is used for saving back-up files within the Disaster Recovery System of Cisco UCM?
- A. remote disk on an NFS share
- B. remote disk on the SFTP server
- C. local disk on the Cisco UCM server
- D. remote disk on a CIFS share
Answer: B
NEW QUESTION # 72
......
Test Engine to Practice 350-801 Test Questions: https://www.passtorrent.com/350-801-latest-torrent.html
Use Valid 350-801 Exam - Actual Exam Question & Answer: https://drive.google.com/open?id=14cpYD2uTsTUrY16lGN3WBPr3aHnncaH0