C-SACP-2107 Practice Dumps - Verified By PassTorrent Updated 82 Questions [Q36-Q60]

Share

C-SACP-2107 Practice Dumps - Verified By PassTorrent Updated 82 Questions

Updated C-SACP-2107  Exam Dumps - PDF Questions and Testing Engine

NEW QUESTION 36
In SAP Analytics Cloud, what must you do when you use a planning model with group reporting data for legal elimination reports? Note: There are 2 correct Answers to this question.

  • A. Store elimination entities persistently.
  • B. Determine elimination entities dynamically.
  • C. Select a consolidation profit center hierarchy.
  • D. Select a consolidation unit hierarchy.

Answer: A,D

 

NEW QUESTION 37
Why would you decide to use an Analytic Application instead of a Story? Note: There are 2 correct Answers to this question.

  • A. To do form-based data input
  • B. To have fewer data action triggers
  • C. To use data cell comments
  • D. To use advanced data actions

Answer: A,B

 

NEW QUESTION 38
When you run a data action with the "publish target version automatically" setting enabled, what changes to your data are published? Note: There are 2 correct Answers to this question.

  • A. Data action-specific changes to the target public version
  • B. Data action-specific changes to the private and public versions
  • C. Manual changes to the target version
  • D. Manual changes to the private and public versions

Answer: A,C

 

NEW QUESTION 39
Which of the following actions would allow you to use data point comments? Note: There are 2 correct Answers to this question.

  • A. Add a comment widget to the story.
  • B. Insert a calculated column to a table.
  • C. Activate comments by model.
  • D. Activate comments by dimension.

Answer: A,B

 

NEW QUESTION 40
You are importing from SAP S/4HANA into a planning model with pre-converted actuals turned on. What mappings are required to import both local and default currency?

  • A. Two accounts
  • B. Two currencies
  • C. Two measures
  • D. Two currency types

Answer: C

 

NEW QUESTION 41
Your account dimension has an account for Profit that is calculated as [Revenue] - [Cost]. Which formula can you use to enter a value for Profit and have the system re-calculate Cost while Revenue remains constant?

  • A. [Revenue] - [Cost] | INVERSE ([Cost] := [Revenue] - [Profit])
  • B. [Revenue] - [Cost] | INVERSE ([Cost] = [Revenue] - [Profit])
  • C. [Revenue] - [Cost] := INVERSE ([Cost] = [Revenue] - [Profit])

Answer: A

 

NEW QUESTION 42
When you import data into a classic planning model, what can you do with category and version in data management? Note: There are 3 correct Answers to this question.

  • A. Use an existing category.
  • B. Use an existing version.
  • C. Create a new category.
  • D. Create a new public version.
  • E. Create a new private version.

Answer: A,B,D

 

NEW QUESTION 43
You want to rebuild an SAP Analytics Cloud classic planning model but the Rebuild Model button is inactive. Why might this happen? Note: There are 2 correct Answers to this question.

  • A. Data exists in the model.
  • B. A private version is used in the model.
  • C. A public version is used in the model.
  • D. Currency conversion is enabled.

Answer: B,D

 

NEW QUESTION 44
What data sources are available for SAP Analysis, Edition for Microsoft Office? Note: There are 2 correct Answers to this question.

  • A. SAP BusinessObjects Universe
  • B. SAP S/4HANA Cloud for group reporting
  • C. SAP HANA
  • D. SAP Analytics Cloud

Answer: C,D

 

NEW QUESTION 45
What can you do in an analytic application?

  • A. Enter form-based comments.
  • B. Read data from write-back models.
  • C. Trigger input tasks.

Answer: B

 

NEW QUESTION 46
Which of the following actions on the date dimension are available in Value Driver Trees? Note: There are 2 correct Answers to this question.

  • A. Change the date filter for an individual node within the Value Driver Tree.
  • B. Change the date filter for the entire Value Driver Tree.
  • C. Specify a presentation date range.
  • D. Select the Day granularity.

Answer: B,D

 

NEW QUESTION 47
You have financial data from SAP S/4HANA with local currency, group currency, and quantity values. You need to import the data into SAP Analytics Cloud.Following the SAP best practice guidelines, how would you design a New Model?

  • A. Three measures and no accounts
  • B. Three measures and at least one account
  • C. One measure and at least three accounts

Answer: B

 

NEW QUESTION 48
From which S/4HANA source table can you import actual data for cost centers?

  • A. BSEG
  • B. ACDOCA
  • C. GLT0
  • D. ACDOCU

Answer: B

 

NEW QUESTION 49
You imported a transaction data file into an empty model with the results as shown in Figure A.
Later, a member of the finance team wants you to import a new data file. In the new data file, you find the following differences: The value of the Labor account has increased to 1600. There is a new record for the Services account, with a value of 250. The record for the Travel account has been deleted. To achieve the result shown in Figure B, which option must you use to update the data?

  • A. Update
  • B. Clean and replace selected version data
  • C. Clean and replace subset of data with Scope = Version and Account
  • D. Append: Reject duplicated rows in model

Answer: A

 

NEW QUESTION 50
What dimension types can be used to determine currencies? Note: There are 2 correct Answers to this question.

  • A. Date
  • B. Account
  • C. Generic
  • D. Organization

Answer: C,D

 

NEW QUESTION 51
How can you change plan data via the Planning Panel in a story? Note: There are 2 correct Answers to this question.

  • A. Realign values based on properties.
  • B. Repost the values to a higher level of the hierarchy.
  • C. Redistribute values to a lower level of the hierarchy.
  • D. Distribute values based on recommendations.

Answer: C,D

 

NEW QUESTION 52
What are prerequisites for importing master data from an SAP S/4HANA system into SAP Analytics Cloud? Note: There are 2 correct Answers to this question.

  • A. The target dimension must be input enabled.
  • B. A data service must be active in the S/4HANA service catalog.
  • C. The target dimension must be a private dimension.
  • D. A CDS view must exist for the source data.

Answer: B,D

 

NEW QUESTION 53
In the visual editor for advanced formulas, which of the following formula options can you select? Note:
There are 2 correct Answers to this question.

  • A. Round
  • B. Repeat
  • C. Lookup
  • D. Comment

Answer: A,C

 

NEW QUESTION 54
You are using the planning panel to distribute values. Which of the following driver options can you select? Note: There are 3 correct Answers to this question.

  • A. Append
  • B. User-defined
  • C. Equal
  • D. Proportionate
  • E. Overwrite

Answer: B,C,D

 

NEW QUESTION 55
You are using the SAP BPC, version for SAP BW/4HANA Standard option. When importing data from a YTD model to SAP Analytics Cloud, what can you do? Note: There are 2 correct Answers to this question.

  • A. Select the basic model type.
  • B. Store YTD data for income statement accounts.
  • C. Store periodic data for income statement accounts.
  • D. Select the write-back model type.

Answer: A,C

 

NEW QUESTION 56
You are using SAP BPC, version for SAP BW/4HANA Standard option. When you create a planning model based on an SAP BPC model, what can you do in SAP Analytics Cloud? Note: There are 2 correct Answers to this question.

  • A. Create public dimensions.
  • B. Create data manager packages.
  • C. Create data actions.
  • D. Create planning sequences.

Answer: C,D

 

NEW QUESTION 57
You want to import data from SAP BPC Standard. Which SAP Analytics Cloud planning model types can you use? Note: There are 2 correct Answers to this question.

  • A. Financial
  • B. Basic
  • C. Generic
  • D. Write-back

Answer: B,D

 

NEW QUESTION 58
When you import account hierarchy data from SAP S/4HANA, which of the following account types are determined by semantic tags exclusively? Note: There are 2 correct Answers to this question.

  • A. LEQ
  • B. INC
  • C. AST
  • D. EXP

Answer: A,C

 

NEW QUESTION 59
In a story, how can you create a chart to compare versions? Note: There are 2 correct Answers to this question.

  • A. Add a new member with a formula.
  • B. Add a chart component.
  • C. Add a 'difference from' measure.
  • D. Add a recommended comparison.

Answer: B,D

 

NEW QUESTION 60
......


SAP C-SACP-2107 Certification Exam Topics:

Topic AreasTopic Details, Courses, Books
SAP BPC Integration, Analytic Applications, and Microsoft Excel Integration > 12%

Design and build hybrid planning solutions with SAP BPC, build analytic applications, use MS Excel integration.

Core planning functionality > 12%

Configure and use planning features to input data, distribute data, simulate, and analyze currencies.

Data actions and allocation processes > 12%

Configure, use, and schedule data actions and allocations.

SAP S/4HANA Integration > 12%

Build S/4HANA Finance, group reporting, and IBP imports and exports.

Integrated Planning Overview & SAP BW Integration > 12%

Analyze and explain planning integration, delivered content, and planning connections.

Introduction, dimensions, and planning models > 12%

Design, build, and maintain dimensions and models to meet various planning requirements.

Forecasting, collaboration, and process control > 12%

Use and configure predictive forecast, smart predict, rolling forecasts, and value driver trees.


 

New (2021) SAP C-SACP-2107  Exam Dumps: https://www.passtorrent.com/C-SACP-2107-latest-torrent.html