Best Way To Study For SAP C_TPLM30_67 Exam Brilliant C_TPLM30_67 Exam Questions PDF
Updated Verified Pass C_TPLM30_67 Exam - Real Questions & Answers
NEW QUESTION 36
You are installing an SC8000 array and the customer notices that each of the controllers only have 16 GB of memory. The customer wants to maximize this memory. What is the maximum RAM supported on a single SC8000 controller?
- A. 256 GB
- B. 32 GB
- C. 128 GB
- D. 64 GB
Answer: D
Explanation:
Explanation/Reference: https://www.dell.com/community/Compellent/I-need-help-doubts-about-controlling-compellent- SC8000/td-p/4222299
NEW QUESTION 37
When the user creates a maintenance plan for a call object (order), which value in the planning data determines the order type?
- A. Maintenance planner group
- B. Main work center
- C. Maintenance activity type
- D. Priority
Answer: A
NEW QUESTION 38
You need to set up the iDRAC IP address on an SC Series controller with the following details:
* IP address 192.168.0.160
* subnet mask 255.255.255.0
* gateway 192.168.0.1
Which commands should be used to complete this task?
ifconfig inet set eth0 ip 192.168.0.160
- A. platform bmc set netmask 255.255.255.0
platform bmc set gateway 192.168.0.1 - B. ifconfig inet set eth0 netmask 255.255.255.0
ifconfig inet set eth0 gateway 192.168.0.1
ifconfig inet set eth1 ip 192.168.0.160 - C. controller ipconfig set eth0 netmask 255.255.255.0
controller ipconfig set eth0 gateway 192.168.0.1
platform bmc set ip 192.168.0.160 - D. ifconfig inet set eth1 netmask 255.255.255.0
ifconfig inet set eth1 gateway 192.168.0.1
controller ipconfig set eth0 ip 192.168.0.160
Answer: A
NEW QUESTION 39
You want to set up an external refurbishment process through subcontracting, using material requirements planning (MRP)?
Which of the following must you set in the system?
- A. The Material Provision indicator for special stock in the refurbishment order header.
- B. The Special Procurement indicator in the material master record.
- C. The Subcontracting flag for the refurbishment order type.
- D. The Subcontracting flag in the refurbishment order header.
Answer: B
NEW QUESTION 40
What are consequences of activating alternative labeling for functional locations?
- A. You can change the primary functional location label and delete the old functional location label.
- B. You can change the primary functional location label and keep the old label as a historical functional location label.
- C. You can assign a serial number to a functional location.
- D. The company code is automatically included in the functional location label.
Answer: B
NEW QUESTION 41
You are deploying a new SCv2020 system with four additional SCv100 expansion enclosures. What is the spare-to-managed drive ratio?
- A. 1 spare for every 20 managed drives of that drive type
- B. 1 spare for every drive of that type per enclosure
- C. 1 spare per enclosure regardless of the drive type
- D. 1 spare for every 24 managed drives of that drive type
Answer: A
NEW QUESTION 42
What step activates the Warranty subscreen as part of the equipment master data record?
- A. Adding the Warranty subscreen in the Object Information view of the equipment master data record
- B. Setting the Master Warranty indicator in the equipment master data
- C. Setting the Use-in-Equipment indicator in the Master Warranty transaction
- D. Adding the Warranty subscreen in View Profiles for Technical Objects
Answer: D
NEW QUESTION 43
Your customer wants to establish a maintenance work center with various activity types, each with a different fixed price. How do you accomplish this?
Please choose the correct answer.
Response:
- A. Define the activity types in Controlling and assign them to the cost center of the work center.
- B. Create various maintenance activity types with the fixed prices and assign them to the work
- C. Create various maintenance activity types in each work center and assign a price.
- D. Define the activity types for each maintenance planning plant.
Answer: A
NEW QUESTION 44
You are testing a new SC7020 storage array. You decided to deploy a temporary installation of Dell Storage Manager (DSM) Data Collector with an embedded database. What is the maximum number of days in which array information can be retained?
- A. 90 days
- B. 30 days
- C. 60 days
- D. 15 days
Answer: B
Explanation:
Explanation/Reference: https://topics-cdn.dell.com/pdf/storage-sc2000_install-guide_en-us.pdf (p.11)
NEW QUESTION 45
In which lifecycle scenarios can you use SAP Solution Manager?
There are 3 correct answers to this question.
Response:
- A. Implementation
- B. Scoping
- C. Optimization
- D. Retirement
- E. Operations
Answer: A,C,E
NEW QUESTION 46
To display overhead costs in a maintenance order, you need to assign a costing sheet in Customizing.
To which parameter do you assign the costing sheet?
Please choose the correct answer.
Response:
- A. Costing type
- B. Valuation categories
- C. Valuation variant
- D. Version for cost estimates
Answer: C
NEW QUESTION 47
You are installing a new SC9000. Which procedure should be used to install and configure the system?
- A. Connect through a null modem cable to the serial port
- B. Connect through the Dell Storage Manager Client
- C. Connect through the supplied proprietary serial cable to the serial port
- D. Connect through the iDRAC port
Answer: C
NEW QUESTION 48
Your customer uses the dynamic availability check for stock material.
Where does the system check material availability for an operation?
- A. In all plants where material inventory exists
- B. Only in the plant where the material has been reserved
- C. Only in the plant where the material is flagged with the special stock indicator for maintenance stock
- D. In all plants where the material is managed with serial numbers
Answer: B
NEW QUESTION 49
Your customer needs to review costs in a maintenance order at operation level.
Which Customizing steps must you perform?
- A. Set the account assignment indicator for the valuation variant and assign the valuation variant to the cost variant.
- B. Set the account assignment indicator for the settlement profile and assign the settlement profile to the order type.
- C. Set the account assignment indicator for the costing sheet and assign the costing sheet to the order type.
- D. Set the account assignment indicator for the order type and assign the order type to the plants.
Answer: D
NEW QUESTION 50
When the user creates a maintenance plan for a call object (order), which value in the planning data determines the order type?
- A. Maintenance planner group
- B. Main work center
- C. Maintenance activity type
- D. Priority
Answer: A
NEW QUESTION 51
What all are the steps sequenced for structuring of technical process?
There are 2 correct answers to this question.
Response:
- A. Identify
- B. Structure
- C. Define
- D. Execute
- E. Assign
Answer: A,B
NEW QUESTION 52
Which object do you use to assign number ranges for maintenance plans in Customizing?
Please choose the correct answer.
Response:
- A. Maintenance planner group
- B. Technical object
- C. Maintenance item
- D. Maintenance plan category
Answer: D
NEW QUESTION 53
A user has planned an operation with labor costs and material costs; however, the material cost element is not assigned to a value category.
Where do the material costs appear in the value categories for the order?
- A. In the internal activity value category
- B. In the overhead value category
- C. In a new, automatically created value category
- D. In the unassigned value category
Answer: D
NEW QUESTION 54
What do you need to select when you create a maintenance plan that only generates notification(s)?
- A. A specific maintenance strategy for notifications
- B. A specific notification type for maintenance plans
- C. A maintenance plan category for notifications
- D. A specific notification type that includes a task list
Answer: C
NEW QUESTION 55
Refer to the exhibit.
Which port on the second SC280 expansion enclosure is used to connect the first expansion enclosure to the second expansion enclosure on the A-side of this configuration?
- A. A = Port A, left EMM
- B. D = Port B, Right EMM
- C. C = Port C, Left EMM
- D. B = Port B, Left EMM
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 56
Which of the following item categories can you use in a Plant Maintenance bill of material (BOM)?
There are 2 correct answers to this question.
Response:
- A. Non-stock material
- B. Equipment
- C. Functional location
- D. Assembly
- E. Stock material
Answer: A,E
NEW QUESTION 57
When a user creates a notification or an order and enters a functional location as the reference object, you want the system to suggest the subordinate equipment automatically.
In addition to setting the reference object view in the order or the notification, what other settings must you make? (Choose two)
- A. Set the Equipment-Installation Allowed indicator in the Functional Location master data record.
- B. Set View Profiles for Technical Objects in Customizing.
- C. Set the Single Installation indicator in the equipment master data record.
- D. Set the Single Installation indicator in the Functional Location master data record.
Answer: A,D
NEW QUESTION 58
Identifies the various ways to navigate around SAP system.
There are 2 correct answers to this question.
Response:
- A. Insert
- B. Text
- C. Using the favorites list
- D. Using the menu entries
- E. Clipboard
Answer: C,D
NEW QUESTION 59
......
Updated PDF (New 2022) Actual SAP C_TPLM30_67 Exam Questions: https://www.passtorrent.com/C_TPLM30_67-latest-torrent.html