New 2021 NS0-176 exam questions Welcome to download the newest PassTorrent NS0-176 PDF dumps (141 Q&As)
P.S. Free 2021 Cisco and NetApp FlexPod NS0-176 dumps are available on Google Drive shared by PassTorrent
NEW QUESTION 78
Exhibit:
You just configured a new Storage Virtual Machine named SVM1 on your NetApp cluster to serve up NFS datastores to an ESX cluster.
Your VMware administrator tells you that the ESX servers are unable to access the datastore that you created on node flexpod1-san01-01. The IP address of one of the ESX servers is 10.33.128.100.
Referring to the exhibit, which command would you use to troubleshoot this problem?
- A. ~network ping -lif flexpod1-san01-01 mgmt1 -vserver flexpod1-san01 -destination 10.33.128.100~
- B. ~network ping -lif cluster mgmt -vserver flexpodl-san01 - destination 10.33.128.100~
- C. ~network ping -node flexpod1-san01-01 -destination 10.33.128.100~
- D. ~network ping -lif nfs1 -vserver svm1 -destination 10.33.128.100~
Answer: D
NEW QUESTION 79
Exhibit:
Referring to the exhibit, which two diagrams show the correct way to cable a new NetApp clustered Data ONTAP cluster with two nodes? (Choose two.)
- A. II
- B. I
- C. IV
- D. III
Answer: A,D
NEW QUESTION 80
Which two technologies must be deployed for a Cisco Nexus 9000 ACI design? (Choose two.)
- A. LACP
- B. spine switch
- C. VSM
- D. APIC
Answer: B,D
NEW QUESTION 81
A customer uses Cisco Intersight and now wants to monitor their NetApp storage system with Intersight.
In this scenario, which three actions must be completed to accomplish this task? (Choose three.)
- A. Activate the API Gateway in Active IQ Unified Manager.
- B. Get an Intersight Advantage tier license.
- C. Activate the API Gateway in ONTAP System Manager.
- D. Get an Intersight Essentials tier license.
- E. Deploy Active IQ Unified Manager.
Answer: A,B,E
NEW QUESTION 82
After deploying a FlexPod solution, which tool would you use to validate a successful installation?
- A. Config Advisor
- B. UCS Manager
- C. Hardware Universe
- D. System Manager
Answer: A
NEW QUESTION 83
You are installing a FlexPod Express solution with a NetApp AFF A250 at a customer's remote site.
In this scenario, which two devices are required to provide an NFS v3 datastore? (Choose two.)
- A. Cisco Nexus 3000 Switches
- B. NetApp BES-53248 Switches
- C. Cisco UCS 6324 Fabric Interconnects
- D. Cisco UCS 6454 Fabric Interconnects
Answer: A,C
NEW QUESTION 84
When creating local user, which two are valid user names? (Choose two)
- A. somebody
- B. daemon
- C. root
- D. 0
- E. best_user
- F. 1greatuser
Answer: A,E
NEW QUESTION 85
You installed a new NetApp cluster running clustered Data ONTAP. There is a single Storage Virtual Machine (SVM) named esx1 on the cluster.
A volume named esx_datastore1 is created in the SVM esx1. The name of the root volume for the esx1 SVM is esx1_rootvol. The default export policy was applied to the volume esx1_rootvol.
You verified that the export policy applied to esx_datastore1 contains a single rule that allows all clients to mount the volume as read/write using any version of NFS. A Linux client attempts to NFS mount the volume and receives a Permission Denied error.
In this scenario, what caused this error?
- A. The volume esx_datastore1 has not been mounted into the namespace of the esx1 SVM.
- B. UNIX permissions for the volume esx1_rootvol are not set to read/write.
- C. The default export-policy does not have at least one rule to allow all clients read-only access.
- D. NFS has not been configured on the SVM esx1.
Answer: C
NEW QUESTION 86
An administrator has a FlexPod solution and is using OnCommand Unified Manager and OnCommand Performance Manager to monitor the FlexPod environment. Full integration has previously been configured between the two OnCommand virtual appliances; however, new performance issues are not being seen in the OnCommand Unified Manager dashboard.
In this scenario, which two settings should the administrator verify? (Choose two.)
- A. Ensure that the Event Publisher user credentials are entered correctly on the OnCommand Performance Manager appliance.
- B. Ensure that network connectivity exists between the two virtual appliances.
- C. Ensure that OnCommand Performance Manager is licensed for use with OnCommand Unified Manager.
- D. Ensure that the NetApp cluster is configured to forward SNMP data to OnCommand Performance Manager.
Answer: A,C
NEW QUESTION 87
Which two statements about HA pairs in a NetApp cluster are true? (Choose two.)
- A. HA pairs in the same chassis are not connected to each other through an HA interconnect.
- B. In the event of a storage failover, the surviving node always takes over the partner's data LIFs.
- C. In the event of a storage failover, the surviving node provides read/write access to the partner's disks until the failed node becomes available again.
- D. Non-disruptive aggregate relocation can be performed between HA pairs without a takeover and giveback.
Answer: B,C
NEW QUESTION 88
A customer wants a newly deployed UCS C-Series server's fans to run at the minimum speed required to keep the server cool. The customer is also complaining that the server fans are making too much noise.
In this scenario, which type of fan speed should you select under the Power Control Policy of UCSM?
- A. Balanced
- B. Performance
- C. Max Power
- D. Low Power
Answer: A
NEW QUESTION 89
Which statement is true for Fibre Channel QoS System Class?
- A. One cannot modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will not be remarked
- B. One can modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will not be remarked
- C. One cannot modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will be remarked to 0
- D. One can modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will be remarked to 0
Answer: C
NEW QUESTION 90
Which two are correct about VSAN configuration within UCS Manager? (Choose two)
- A. VSAN ID and FCoE VLAN ID have to match.
- B. In addition to SAN tab, VSANs can be configured under UCSM Server tab as well.
- C. VSAN IDs 3840-4079 are not available regardless of the Fabric Interconnect mode.
- D. VSAN can be configured as fabric interconnect specific.
- E. We can delete VSAN 1.
- F. VSAN can be configured as a global parameter.
Answer: D,E
NEW QUESTION 91
A customer wants to reuse existing networking equipment that was pulled from another data center for a new FlexPod Datacenter solution. They want to know if their switch models are supported.
In this scenario, which two switch models will accomplish this task? (Choose two.)
- A. Cisco Nexus 9396PX
- B. Cisco MDS 9250i
- C. Cisco Catalyst 9300-48P
- D. Cisco Catalyst 6504
Answer: A,B
NEW QUESTION 92
You have a FlexPod solution with Cisco 6296UP Fabric Interconnects. You currently have a direct-attached AFF8040 system using FCoE for storage connectivity. You would like to reconfigure the FlexPod so that the storage is connected through the upstream switches.
Using UCS Manager, which two steps would you perform to accomplish this task? (Choose two.)
- A. Configure the FI ports with the Uplink role.
- B. Configure the FI ports with the FCoE Uplink role.
- C. Using the Configure Unified Ports wizard, change the port types to FC.
- D. Using the Configure Unified Ports wizard, change the port types to Ethernet.
Answer: A,C
NEW QUESTION 93
When connecting the Nexus 1110-X to the Nexus switch, what Spanning Tree port type is used?
- A. Edge
- B. Network
- C. Edge trunk
- D. Normal
- E. Trunk
Answer: C
NEW QUESTION 94
......
NS0-176 exam questions from PassTorrent dumps: https://www.passtorrent.com/NS0-176-latest-torrent.html (141 Q&As)