TAKE Storage Administrator D-VXR-DY-23 PRACTICE QUESTIONS FOR AMAZING RESULTS [Q208-Q228]

Share

TAKE Storage Administrator D-VXR-DY-23 PRACTICE QUESTIONS FOR AMAZING RESULTS

 EMC D-VXR-DY-23 Exam Dumps Are Essential To Get Good Marks

NEW QUESTION # 208
What must be used when deploying VxRail with a customer-supplied VDS?

  • A. Deployment Wizard using the configuration file method
  • B. VxRail PowerShell SysBringUp Module
  • C. Deployment Wizard using the step-by-step method
  • D. VxRail API with configuration file

Answer: C


NEW QUESTION # 209
A planned VxRail deployment will use an external vCenter Server and syslog server.
Which ping connectivity tests should succeed and which should fail before the deployment?

  • A. Succeed: vCenter server and syslog server
    Fail: VxRail Manager and ESXi hosts
  • B. Succeed: VxRail Manager and ESXi hosts
    Fail: vCenter server and syslog server
  • C. Succeed: VxRail Manager and syslog server
    Fail: vCenter server and ESXi hosts
  • D. Succeed: ESXi hosts and syslog server
    Fail: VxRail Manager and vCenter server

Answer: A,C


NEW QUESTION # 210
What is a difference between vSAN Data-In-Transit Encryption and vSAN Data-At-Rest-Encryption?

  • A. Data-In-Transit Encryption: Does not require a Key Management Server Data-At-Rest Encryption: Requires a Key Management Server
  • B. Data-In-Transit Encryption: Encrypts traffic between VMs and the VxRail nodes Data-At-Rest Encryption: Encrypts traffic between VxRail nodes only
  • C. Data-In-Transit Encryption: Addresses fear of media theft Data-At-Rest Encryption: Addresses fear of rogue administrators
  • D. Data-In-Transit Encryption: Key Management Server must reside on the vSAN cluster Data-At-Rest Encryption: Key Management Server can reside on the vSAN cluster

Answer: A

Explanation:
Table Description automatically generated


NEW QUESTION # 211
What is the correct CLI command to collect only the iDRAC logs for node HL2S8N2?

  • A. vm-support.sh --nodes HL2S8N2 -i
  • B. generateFullBundle.py --nodes HL2S8N2 -i
  • C. vc-support-bundle.sh --nodes HL2S8N2 -i
  • D. generateLogBundle.py --nodes HL2S8N2 -i

Answer: D


NEW QUESTION # 212
For which typical activity would the Full data migration setting be used when placing a VxRail host into maintenance mode?

  • A. Shutting down an entire cluster
  • B. Permanently removing host from cluster
  • C. Rebooting a single ESXi host
  • D. Temporary maintenance

Answer: B

Explanation:
A screenshot of a computer Description automatically generated with medium confidence


NEW QUESTION # 213
According to the VxRail PEQ Engagement Details worksheet, links to what resources should the SE send to the customer?

  • A. VxRail QuickStart Guide
    Network Validation Tool
  • B. VxRail vCenter Server Planning Guide
    VxRail Network Planning Guide
  • C. VxRail vCenter Server Planning Guide
    Network Validation Tool
  • D. VxRail QuickStart Guide
    VxRail Network Planning Guide

Answer: A


NEW QUESTION # 214
What are the requirements for a customer-supplied VDS in a VxRail deployment?

  • A. 4 or 8 uplinks
    Port groups for Discovery, Management, vCenter Server, vMotion, and vSAN
  • B. 4 or 8 uplinks
    Port groups for Discovery, Management, vMotion, and vSAN only
  • C. 2 or 4 uplinks
    Port groups for Discovery, Management vCenter Server, vMotion, and vSAN
  • D. 2 or 4 uplinks
    Port groups for Discovery, Management, vMotion, and vSAN only

Answer: C

Explanation:


NEW QUESTION # 215
What is a valid 2-node VxRail cluster configuration?

  • A. Series with 2x 25 GbE in a switch configuration
  • B. Series with 4x 1 GbE in a direct-connect configuration
  • C. Series with 4x 10 GbE in a switch configuration
  • D. Series with 4x 25 GbE in a direct-connect configuration

Answer: C


NEW QUESTION # 216
Match each VxRail configuration with its related characteristic.

Answer:

Explanation:


NEW QUESTION # 217
A customer has decided that they will be using the Spanning Tree protocol in their Dell EMC ToR switches How should the switch ports used for VxRail be configured to achieve a successful deployment?

  • A. Enable MLD snooping and querier
  • B. Set the port type to edge
  • C. Enable link aggregation for all ports
  • D. Set the port mode to access

Answer: B


NEW QUESTION # 218
When adding an S Series node to a Gen 2 VxRail 240F cluster the build fails.
What could be a possible cause of this situation?

  • A. Quanta and Dell hardware cannot be mixed in the same cluster
  • B. IP Pool has no more free addresses
  • C. Loudmouth process needs to be restarted
  • D. Hybrid and Flash nodes cannot be mixed in the same cluster

Answer: D


NEW QUESTION # 219
A VxRail cluster has just been deployed. The administrator notices that Deduplication and Compression are not enabled.
What is the reason for this issue?

  • A. Nodes are configured with a single disk group
  • B. The VSAN licensing is missing
  • C. Nodes are configured with hybrid drives
  • D. The service is disabled by default

Answer: D


NEW QUESTION # 220
Which functionality is provided by the VxRail vCenter plug-in - Physical View?

  • A. LED indicator activation, initiate a disk replacement, and BIOS parameter change
  • B. BIOS and firmware versions, cluster shutdown, and initiate BIOS and firmware update
  • C. Hardware alerts, BIOS and firmware versions, and initiate a disk replacement
  • D. Hardware alerts, LED indicator activation, and initiate power supply replacement

Answer: C


NEW QUESTION # 221
A customer requires a VxRail Stretched Cluster with E560F nodes in its minimal configuration. In addition, the cluster should be able to use both erasure coding options.
Which setup fulfills the requirement?

  • A. 6+6 nodes
  • B. 4+4 nodes
  • C. 3+3 nodes
  • D. 8+8 nodes

Answer: C


NEW QUESTION # 222
An implementation engineer is deploying a new VxRail cluster What should they confirm before installing the hardware?

  • A. Service laptop is on the same IP network as the iDRACs
  • B. At least 24 in (61 cm) of clearance exists in front of and behind the cabinet
  • C. Redundant power zones exist with adequate power cables
  • D. Power distribution supports only the power rating of a single node

Answer: C


NEW QUESTION # 223
Match each VxRail API Method to its respective VxRail Manager function.

  • A. DELETE - Remove a resource
    POST - Retrieve a resource
    PUT - Edit or update an existing resource
    GET - Create a resource
  • B. DELETE - Create a resource
    POST - Remove a resource
    PUT - Edit or update an existing resource
    GET - Retrieve a resource
  • C. DELETE - Edit or update an existing resource
    POST - Retrieve a resource
    PUT - Remove a resource
    GET - Create a resource
  • D. DELETE - Remove a resource
    POST - Create a resource
    PUT - Edit or update an existing resource
    GET - Retrieve a resource

Answer: D


NEW QUESTION # 224
An implementation engineer is in the validation phase of a VxRail deployment with two Dell EMC ToR switches. Which command should they run on each of the ToR switches to validate that Link Aggregation has been configured according to Dell best practices for VxRail node interfaces?

  • A. show interface status
  • B. show port-channel summary
  • C. show network-policy profile
  • D. show interface

Answer: B


NEW QUESTION # 225
Based on the exhibit, what is the correct IP address to use when resetting a G Series node with the reset script?

  • A. 192.168.20.35
  • B. 169.254.234.124
  • C. 192.168.80.35
  • D. 192.168.30.35

Answer: D


NEW QUESTION # 226
What categories can be validated by the VxRail NVT?

  • A. Network Services, ToR Switches, and VxRail Nodes
  • B. Network Services, Upstream Switches, and VxRail Nodes
  • C. ToR Switches, Upstream Switches, and VxRail Nodes
  • D. Network Services, ToR Switches, and Upstream Switches

Answer: D


NEW QUESTION # 227
In which three VxRail Configuration Portal locations can an implementation engineer download the cluster configuration file? (Select 3)

  • A. From the Validate Configuration File tab when editing a cluster
  • B. From the My Deployments tab in the VxRail Configuration Portal
  • C. From the Resources tab in the Edit Cluster Configuration wizard
  • D. From the customer Dell Digital Locker website
  • E. From the My Clusters Tab in the VxRail Configuration Portal

Answer: A,B,E


NEW QUESTION # 228
......

Latest EMC D-VXR-DY-23 Dumps with Test Engine and PDF (New Questions): https://www.passtorrent.com/D-VXR-DY-23-latest-torrent.html

Pass Your D-VXR-DY-23 Exam Easily - Real D-VXR-DY-23 Practice Dump Updated: https://drive.google.com/open?id=1EOYZ3Gp7q_yHqnhX0fXhBpkuD6LDMZaS