Latest C_IBP_2502 Exam Real Tests Free Updated Today
C_IBP_2502 Real Exam Question Answers Updated [Feb 08, 2026]
NEW QUESTION # 13
The S&OP Operator Profiles app is used to configure different types of algorithms. Which algorithm-specific settings are unique for the Time-Series-Based Supply Optimizer? Note: There are 2 correct answers to this question.
- A. Processing mode
- B. Time profile level
- C. Global cost factors
- D. Discretization
Answer: C,D
Explanation:
The S&OP Operator Profiles app in SAP IBP configures planning algorithms (e.g., heuristics, optimizer). The Time-Series-Based Supply Optimizer has unique settings reflecting its optimization approach.
* Option A: DiscretizationThis is correct. Discretization (e.g., binary or integer variables for lot sizes) is specific to the optimizer, enabling discrete decisions (e.g., full truckloads), a feature not in heuristics, per SAP IBP's optimizer documentation.
* Option B: Time profile levelThis is incorrect. Time profile level applies to all time-series planning (heuristics and optimizer), not unique to the optimizer.
* Option C: Global cost factorsThis is correct. The optimizer uses global cost factors (e.g., non- delivery, inventory holding costs) to balance trade-offs across the network, a unique setting compared to heuristics, per SAP IBP's configuration guides.
* Option D: Processing modeThis is incorrect. Processing mode (e.g., batch vs. interactive) is a general job setting, not algorithm-specific to the optimizer.
Thus, A and C are unique settings for the Time-Series-Based Supply Optimizer, per SAP IBP's official documentation.
NEW QUESTION # 14
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level. Which of the following configuration options are possible for this process? Note:
There are 2 correct answers to this question.
- A. Splitting the values from aggregated to detailed level, based on the time profile attribute
- B. Splitting the values from detailed to aggregated level by using a copy operator
- C. Splitting the values from aggregated to detailed level using multiplication by the proportions
- D. Splitting the values from aggregated to detailed level, based on a stored split-factor key figure
Answer: C,D
Explanation:
In SAP IBP, key figure calculations often involve disaggregation or aggregation across planning levels. Here, the task is to distribute (disaggregate) values from a higher aggregation level (PERPRODCUSTREGION, i.e., Product-Customer-Region) to a more detailed level (PERPRODCUST, i.e., Product-Customer). This is a common requirement in supply chain planning to allocate regional data to individual customer levels.
* Option A: Splitting the values from detailed to aggregated level by using a copy operatorThis is incorrect because the question specifies moving from PERPRODCUSTREGION (aggregated) to PERPRODCUST (detailed), not the reverse. A copy operator typically copies values without transformation, and aggregation moves data upward, not downward.
* Option B: Splitting the values from aggregated to detailed level using multiplication by the proportionsThis is correct. In SAP IBP, disaggregation can use proportional factors to split aggregated data. For example, if PERPRODCUSTREGION has a total value (e.g., 100 units), it can be distributed to PERPRODCUST based on predefined proportions (e.g., Customer A gets 60%, Customer B gets
40%). This is configured in the key figure's disaggregation settings using a proportional calculation, a standard feature in SAP IBP's time-series planning.
* Option C: Splitting the values from aggregated to detailed level, based on the time profile attributeThis is incorrect. Time profile attributes (e.g., week, month) govern temporal granularity, not the structural disaggregation between planning levels like PERPRODCUSTREGION and PERPRODCUST. Disaggregation in SAP IBP is driven by key figure settings, not time profile attributes directly.
* Option D: Splitting the values from aggregated to detailed level, based on a stored split-factor key figureThis is correct. SAP IBP supports disaggregation using a stored key figure as a split factor. For instance, a key figure like "Customer Distribution Ratio" (stored at PERPRODCUST) can define how the aggregated value (e.g., 100 units at PERPRODCUSTREGION) is split (e.g., 70 units to Customer A, 30 units to Customer B). This method is widely used in SAP IBP for precise, data-driven disaggregation, as documented in SAP's configuration guides.
Thus, B and D align with SAP IBP's disaggregation capabilities, leveraging proportions or stored split factors to move data from an aggregated to a detailed level.
NEW QUESTION # 15
A company only purchases a license for the SAP IBP S&OP module and wants to maximize the use of its standard functionality. What processes will they be able to cover? Note: There are 3 correct answers to this question.
- A. Conduct Sales and Operations Planning meetings with cross-functional representatives
- B. Review critical resources against demand
- C. Build what-if scenarios for breaching supply-demand gaps
- D. Get system-solving recommendations on how to react to production bottlenecks
- E. Prepare versions of S&OP plan based on different optimizer modeling costs
Answer: A,C,E
Explanation:
The SAP IBP S&OP module focuses on demand, supply, and inventory alignment using time-series planning, per its standard functionality documentation.
* Option A: Review critical resources against demandThis is incorrect. Resource capacity planning (e.
g., finite scheduling) is part of Supply or Response modules, not standard S&OP, which uses infinite heuristics by default.
* Option B: Conduct Sales and Operations Planning meetings with cross-functional representatives This is correct. Facilitating S&OP meetings to align demand and supply (e.g., via Consensus Demand Plan) is a core S&OP process, per SAP IBP's documentation.
* Option C: Build what-if scenarios for breaching supply-demand gapsThis is correct. What-if analysis using versions/scenarios (e.g., adjusting supply plans) is standard in S&OP, per SAP IBP's capabilities.
* Option D: Prepare versions of S&OP plan based on different optimizer modeling costsThis is correct. The S&OP optimizer can model cost-based scenarios (e.g., varying non-delivery costs), a standard feature, per SAP IBP's documentation.
* Option E: Get system-solving recommendations on how to react to production bottlenecksThis is incorrect. Detailed bottleneck resolution is part of Response or finite planning, not standard S&OP functionality.
Thus, B, C, and D are covered by S&OP, per SAP IBP's official module scope.
NEW QUESTION # 16
You need to use your resource cost-effectively with a certain minimum use, even if it means producing more than demand. Which solutions would apply to this scenario? Note: There are 2 correct answers to this question.
- A. Excess stock can be generated and will need to be staged in an overflow warehouse
- B. Balance can be achieved between excessive prebuild and minimum use by incorporating violation costs
- C. Minimum capacity utilization will result in pull production
- D. Capacity leveling will be possible for production and storage resources
Answer: A,B
Explanation:
This scenario involves optimizing resource use with a minimum threshold, potentially overproducing, in SAP IBP's supply planning, per its documentation.
* Option A: Excess stock can be generated and will need to be staged in an overflow warehouseThis is correct. Overproduction to meet minimum use generates excess stock, requiring storage (e.g., overflow warehouse), a practical outcome, per SAP IBP's planning behavior.
* Option B: Capacity leveling will be possible for production and storage resourcesThis is incorrect.
Capacity leveling (smoothing production) is a PP/DS feature, not standard in IBP's time-series planning.
* Option C: Balance can be achieved between excessive prebuild and minimum use by incorporating violation costsThis is correct. The Supply Optimizer can balance minimum utilization (via costs) and excess production (via inventory costs), a supported solution, per SAP IBP's optimization features.
* Option D: Minimum capacity utilization will result in pull productionThis is incorrect. Pull production (demand-driven) contradicts producing beyond demand; this scenario aligns with push logic.
Thus, A and C apply, per SAP IBP's official supply planning capabilities.
NEW QUESTION # 17
Which type of master data represents the Master Data Type Component?
- A. Reference Master Data Type
- B. External Master Data Type
- C. Virtual master data type
- D. Compound Master Data Type
Answer: A
Explanation:
Master data types in SAP IBP define planning objects, with "Component" typically referring to a specific type like Production Source Item Component, per SAP IBP's documentation.
* Option A: Virtual master data typeThis is incorrect. Virtual types are temporary or derived, not standard for components.
* Option B: Compound Master Data TypeThis is incorrect. Compound types (e.g., SOURCECUSTOMER) combine multiple simple types, not specifically "Component."
* Option C: Reference Master Data TypeThis is correct. The Component master data type (e.g., in Production Source Item) is a Reference type, linking to a Product, per SAP IBP's master data hierarchy (e.g., referencing Product ID).
* Option D: External Master Data TypeThis is incorrect. External types are sourced externally, not a fit for Component.
Thus, C is the correct type, per SAP IBP's official master data definitions.
NEW QUESTION # 18
Which processes are running in sample planning areas SAP6 and SAP3?(Choose three)
- A. Sales and Operations Planning
- B. Supply and Allocation Planning
- C. Demand Sensing
- D. Inventory Optimization
Answer: A,C,D
Explanation:
SAP IBP provides sample planning areas (e.g., SAPIBP1, SAP3, SAP6) with preconfigured processes to demonstrate functionality. The question seems incomplete ("running in sampl to this question"), but based on standard SAP naming and context, it likely asks about processes in SAP6 and SAP3.
* SAP6: Focused on Demand Planning and Sensing.
* SAP3: Focused on Inventory Optimization.
* Both may overlap with broader S&OP processes.
* Option A: Supply and Allocation PlanningThis is incorrect. Supply and Allocation Planning is typically in SAPIBP1 or SAP4 (response-focused), not SAP6 (demand-centric) or SAP3 (inventory- centric).
* Option B: Inventory OptimizationThis is correct. SAP3 is the sample planning area for Inventory Optimization, supporting multi-stage inventory planning with key figures like Target Inventory and Safety Stock, as per SAP's official sample content.
* Option C: Demand SensingThis is correct. SAP6 includes Demand Sensing, enhancing short-term forecasts using pattern recognition and real-time data (e.g., sales orders), a key feature of SAP IBP's demand module.
* Option D: Sales and Operations PlanningThis is correct. Both SAP6 and SAP3 support elements of S&OP. SAP6 covers demand planning (an S&OP component), while SAP3's inventory planning integrates with S&OP's supply-demand balancing, as seen in SAPIBP1's broader S&OP scope.
Thus, B, C, and D match the processes in SAP6 (Demand Sensing, S&OP) and SAP3 (Inventory Optimization, S&OP), per SAP's sample planning area documentation. (Note: The original answer B, D, E seems to misinterpret E as present; corrected to B, C, D based on SAP6/SAP3 focus.)
NEW QUESTION # 19
What are the S&OP operator (optimizer) parameters associated with demand fair share?
- A. Number of fair share segments, Additional tiering costs (default), Inventory days of supply
- B. Number of fair share segments, Additional tiering costs (default), Maximum inventory
- C. Number of fair share segments, Maximum days of coverage, Number of fair share segments late delivery
- D. Number of fair share segments, Additional tiering costs (default), Number of fair share segments late delivery
Answer: D
Explanation:
In SAP IBP for Sales and Operations Planning (S&OP), the Time-Series-Based Supply Optimizer uses "fair share" logic to distribute limited supply across demand, with specific parameters configured in the S&OP Operator Profiles app.
* Option A: Number of fair share segments, Maximum days of coverage, Number of fair share segments late deliveryThis is incorrect. "Maximum days of coverage" is not a fair share parameter; it's more relevant to inventory planning.
* Option B: Number of fair share segments, Additional tiering costs (default), Number of fair share segments late deliveryThis is correct. The optimizer uses:
* Number of fair share segments: Defines priority tiers for demand allocation (e.g., high-priority customers).
* Additional tiering costs (default): Cost penalties for deviating from fair share across tiers.
* Number of fair share segments late delivery: Segments for late delivery prioritization.These align with SAP IBP's fair share optimization settings, per official documentation.
* Option C: Number of fair share segments, Additional tiering costs (default), Maximum inventory This is incorrect. "Maximum inventory" is an inventory constraint, not a fair share parameter.
* Option D: Number of fair share segments, Additional tiering costs (default), Inventory days of supplyThis is incorrect. "Inventory days of supply" is an inventory metric, not a direct fair share parameter.
Thus, B is the correct set of fair share parameters, per SAP IBP's optimizer configuration.
NEW QUESTION # 20
What function would you use to configure a year-to-date calculation?
- A. Last Period Aggregation
- B. Dynamic Rolling Aggregation
- C. Cumulative Aggregation
- D. Rolling Aggregation
Answer: C
Explanation:
A year-to-date (YTD) calculation in SAP IBP sums values from the start of the year to the current period, a common time-series requirement.
* Option A: Rolling AggregationThis is incorrect. Rolling aggregation typically refers to a moving window (e.g., last 3 months), not a fixed YTD scope.
* Option B: Last Period AggregationThis is incorrect. Last period aggregation focuses on the most recent period, not a cumulative YTD total.
* Option C: Cumulative AggregationThis is correct. The CUMULATE function in SAP IBP (e.g., KF2
= CUMULATE(KF1)) calculates a running total from the start of the horizon (e.g., year) to each period, ideal for YTD, per SAP IBP's calculation documentation.
* Option D: Dynamic Rolling AggregationThis is incorrect. Dynamic rolling implies a flexible window, not a fixed YTD accumulation.
Thus, C is the correct function for a YTD calculation, per SAP IBP's official capabilities.
NEW QUESTION # 21
Which Supply Planning processes are part of the tactical planning level within a planning hierarchy? Note:
There are 2 correct answers to this question.
- A. Balancing Supply and Demand
- B. Stock Replenishment
- C. Inventory Build and Reduction
- D. Order Prioritization
Answer: A,C
Explanation:
In SAP IBP, the planning hierarchy includes strategic (long-term), tactical (medium-term), and operational (short-term) levels. Tactical planning (e.g., monthly horizon) focuses on mid-term supply chain decisions.
* Option A: Order PrioritizationThis is incorrect. Order prioritization is an operational-level process, typically in SAP IBP for Response and Supply, dealing with short-term order allocation, not tactical planning.
* Option B: Stock ReplenishmentThis is incorrect. Stock replenishment is operational, focusing on short-term actions (e.g., daily/weekly restocking), not tactical mid-term planning.
* Option C: Inventory Build and ReductionThis is correct. Tactical planning involves decisions like building inventory ahead of demand peaks or reducing excess stock over months, aligning with SAP IBP's Inventory Optimization and S&OP processes at this level.
* Option D: Balancing Supply and DemandThis is correct. Balancing supply and demand over a medium-term horizon (e.g., via S&OP or supply heuristics) is a core tactical process in SAP IBP, ensuring resource alignment, per official planning hierarchy definitions.
Thus, C and D are tactical supply planning processes, per SAP IBP's planning framework.
NEW QUESTION # 22
You need to integrate data from SAP S/4HANA and legacy ERP to SAP IBP. What are the integration tools that you can use with such a setup for data transfer? Note: There are 2 correct answers to this question.
- A. Real-time Integration
- B. Core Interface
- C. SAP Smart Data Integration
- D. SAP Cloud Integration for Data Services
Answer: C,D
Explanation:
SAP IBP integrates with SAP S/4HANA and legacy ERP systems to transfer master and transactional data, using specific tools designed for cloud-based planning.
* Option A: SAP Cloud Integration for Data ServicesThis is correct. SAP Cloud Integration for Data Services (CI-DS) is the primary tool for integrating SAP IBP with S/4HANA and legacy systems. It supports batch data transfers (e.g., master data, key figures) via predefined templates, as per SAP IBP's integration framework.
* Option B: SAP Smart Data IntegrationThis is correct. SAP Smart Data Integration (SDI), part of SAP HANA, enables real-time or batch integration from S/4HANA and legacy ERPs to SAP IBP, particularly for complex data mappings, a supported method in SAP's documentation.
* Option C: Core InterfaceThis is incorrect. Core Interface (CIF) is used in SAP ECC/APO, not SAP IBP. IBP relies on cloud-based tools like CI-DS, not ECC's CIF.
* Option D: Real-time IntegrationThis is incorrect. "Real-time Integration" is a concept, not a specific tool. While SDI supports real-time, it's the tool itself (B), not a standalone option.
Thus, A and B (CI-DS and SDI) are the correct integration tools for SAP IBP, per official integration guides.
NEW QUESTION # 23
What are some of the features of the network charts in SAP Integrated Business Planning for Supply Chain?
Note: There are 2 correct answers to this question.
- A. You can create a network chart from the dedicated app, or use the Analytics Advanced app
- B. To display the network chart, you need the Ship-From Location master data type in the planning area
- C. The network charts visualize relationships between warehouse, plants, customer, and supplier, for finished goods
- D. You can create a network chart from the dedicated app, or use the Manage Analytics Stories app
Answer: A,C
Explanation:
Network charts in SAP IBP (via the Supply Chain Network app) visualize supply chain relationships, a feature of the Control Tower module.
* Option A: To display the network chart, you need the Ship-From Location master data type in the planning areaThis is incorrect. The Ship-From Location is a concept (e.g., in Transportation Lanes), not a specific master data type requirement. Location and Transportation Lane data suffice.
* Option B: You can create a network chart from the dedicated app, or use the Analytics Advanced appThis is correct. The Supply Chain Network app (dedicated) and Analytics Advanced app both support network chart creation, per SAP IBP's visualization documentation.
* Option C: You can create a network chart from the dedicated app, or use the Manage Analytics Stories appThis is incorrect. Manage Analytics Stories creates dashboards, not network charts specifically; it's less focused on network visualization.
* Option D: The network charts visualize relationships between warehouse, plants, customer, and supplier, for finished goodsThis is correct. Network charts depict nodes (e.g., plants, warehouses, customers, suppliers) and edges (e.g., Transportation Lanes) for finished goods, per SAP IBP's network visualization features.
Thus, B and D are accurate features, per SAP IBP's official documentation.
NEW QUESTION # 24
You want to display and edit data in different Units of Measure (UOM). Which of the following must you consider before you use the UOM? Note: There are 3 correct answers to this question.
- A. Units of measure are usually not time-independent
- B. Units of measure are usually not time-dependent
- C. Units of measure are an attribute of a master data type, such as Product
- D. Analytics allow the user to select the target unit of measure
- E. Conversion to the target unit of measure is handled by the SAP IBP Excel add-in
Answer: B,C,D
Explanation:
Units of Measure (UOM) in SAP IBP allow data to be displayed and edited in different units (e.g., kg, lbs), configured via master data and UI settings, per SAP IBP's documentation.
* Option A: Analytics allow the user to select the target unit of measureThis is correct. Analytics apps (e.g., Advanced Dashboards) and Excel planning views let users choose the target UOM for display, leveraging conversion factors, per SAP IBP's visualization capabilities.
* Option B: Units of measure are usually not time-independentThis is incorrect. UOMs are typically static (time-independent) unless explicitly modeled as time-dependent (rare), making this a misstatement.
* Option C: Units of measure are an attribute of a master data type, such as ProductThis is correct.
UOM (e.g., Base UOM) is an attribute of the Product master data type, with conversion factors defined in UOM Conversion master data, per SAP IBP's setup.
* Option D: Units of measure are usually not time-dependentThis is correct. UOMs are generally static attributes, not varying by time unless custom-configured, aligning with SAP IBP's standard behavior.
* Option E: Conversion to the target unit of measure is handled by the SAP IBP Excel add-inThis is incorrect. While the Excel add-in displays converted values, the conversion logic is defined in the planning area (via UOM Conversion factors), not handled solely by the add-in.
Thus, A, C, and D are key considerations, per SAP IBP's official UOM handling.
NEW QUESTION # 25
What are some of the prerequisites for configuring a planning area that results in a successful consistency check? Note: There are 2 correct answers to this question.
- A. Configure at most two input key figures on the same planning level in a key figure calculation
- B. Specify a planning horizon in the planning area for each level of the assigned time profile
- C. Assign the compound master data type and its component master data types
- D. Configure at least one calculated key figure for the planning area
Answer: B,C
Explanation:
A successful consistency check in SAP IBP ensures the planning area's configuration is valid, per SAP IBP's documentation.
* Option A: Configure at least one calculated key figure for the planning areaThis is incorrect.
Calculated key figures are optional; a planning area can function with only stored key figures.
* Option B: Specify a planning horizon in the planning area for each level of the assigned time profileThis is correct. The planning horizon (e.g., past/future periods) must align with the time profile levels (e.g., week, month) for data consistency, a prerequisite, per SAP IBP's setup.
* Option C: Configure at most two input key figures on the same planning level in a key figure calculationThis is incorrect. There's no such limit; calculations can use multiple inputs, depending on complexity.
* Option D: Assign the compound master data type and its component master data typesThis is correct. Compound types (e.g., SOURCECUSTOMER) and their components (e.g., Customer, Location) must be assigned for network consistency, per SAP IBP's documentation.
Thus, B and D are prerequisites, per SAP IBP's official consistency check requirements.
NEW QUESTION # 26
Which unified planning processes' data is commonly reviewed in SAP IBP for sales and operations? Note:
There are 2 correct answers to this question.
- A. Inventory Plan
- B. Consensus Demand Plan
- C. Constrained Demand Plan
- D. Global Demand Plan
Answer: A,B
Explanation:
SAP IBP for Sales and Operations Planning (S&OP) unifies demand, supply, and inventory processes, with key data reviewed in the S&OP cycle, per SAP IBP's S&OP documentation.
* Option A: Global Demand PlanThis is incorrect. "Global Demand Plan" is not a standard term in SAP IBP S&OP; it's typically "Consensus Demand Plan" after collaboration.
* Option B: Constrained Demand PlanThis is incorrect. Constrained demand is more relevant to supply planning or response, not the unified S&OP review process.
* Option C: Inventory PlanThis is correct. The Inventory Plan (e.g., safety stock, target inventory) is reviewed in S&OP to ensure alignment with demand and supply, a key unified process, per SAP IBP's documentation.
* Option D: Consensus Demand PlanThis is correct. The Consensus Demand Plan, finalized after S&OP collaboration, is a central data point reviewed to balance supply and inventory, per SAP IBP's S&OP workflow.
Thus, C and D are commonly reviewed in S&OP, per SAP IBP's official processes.
NEW QUESTION # 27
Model configuration allows the attributes of a master data type to be assigned as key figures. Which feature is relevant for this type of object?
- A. This object usually provides a single value for a unique planning combination
- B. This object contains user-defined criteria that monitor the running of business plans
- C. This type of key figure has better performance than a time-independent key figure
- D. This type of key figure is not usually stored and it cannot be editable
Answer: A
Explanation:
In SAP IBP, the "Attribute as Key Figure" feature allows master data attributes (e.g., Product Category) to be used as key figures, configured in the Planning Areas app, per SAP IBP's documentation.
* Option A: This type of key figure is not usually stored and it cannot be editableThis is incorrect.
Attribute key figures are stored (sourced from master data) and can be editable if configured as such, not inherently non-editable.
* Option B: This type of key figure has better performance than a time-independent key figureThis is incorrect. Performance depends on usage, not a guaranteed advantage over other time-independent key figures.
* Option C: This object usually provides a single value for a unique planning combinationThis is correct. An attribute key figure (e.g., Product Price) provides one static value per planning combination (e.g., PERPROD), a defining feature, per SAP IBP's configuration guides.
* Option D: This object contains user-defined criteria that monitor the running of business plans This is incorrect. This describes alerts or KPIs, not attribute key figures.
Thus, C is the relevant feature, per SAP IBP's official definition.
NEW QUESTION # 28
What are the possible Master Data Maintenance options for SAP Integrated Business Planning for Supply Chain? Note: There are 3 correct answers to this question.
- A. The Planner Workspaces app
- B. The Manage Master Data app
- C. The Data Integration Jobs app
- D. The SAP IBP, add-in for Microsoft Excel
- E. The Planning Areas Model Configuration app
Answer: B,C,D
Explanation:
Master data maintenance in SAP IBP involves creating and updating planning objects (e.g., Products, Locations), supported by specific tools, per SAP IBP's documentation.
* Option A: The SAP IBP, add-in for Microsoft ExcelThis is correct. The Excel add-in's "Manage Planning Objects" feature allows master data maintenance, per SAP IBP's UI capabilities.
* Option B: The Manage Master Data appThis is correct. This Fiori app is designed for direct master data management (e.g., editing Locations), per SAP IBP's documentation.
* Option C: The Planner Workspaces appThis is incorrect. Planner Workspaces is for planning and visualization, not master data maintenance.
* Option D: The Planning Areas Model Configuration appThis is incorrect. This app configures planning areas, not master data directly.
* Option E: The Data Integration Jobs appThis is correct. This app (formerly Data Integration) imports master data via files or integration, per SAP IBP's data management guides.
Thus, A, B, and E are maintenance options, per SAP IBP's official tools.
NEW QUESTION # 29
......
SAP C_IBP_2502 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
Latest C_IBP_2502 Study Guides 2026 - With Test Engine PDF: https://www.passtorrent.com/C_IBP_2502-latest-torrent.html
Easily To Pass New SAP C_IBP_2502 Dumps with 82 Questions: https://drive.google.com/open?id=1bf3XtOnDvtqgJGVAfpn6ra4BAjQzOHbG