[2025] Pass Cisco 010-151 Test Practice Test Questions Exam Dumps
Verified 010-151 dumps Q&As - 010-151 dumps with Correct Answers
NEW QUESTION # 75
What is the correct path to verify the Overall Status of Chassis 1 | Server 3?
- A. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 Status tab
- B. Status Tab > Chassis > Chassis 1 > Servers > Server 3
- C. Admin Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
- D. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 FSM tab
- E. Servers Tab > Chassis > Server 3 General tab
- F. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
Answer: F
NEW QUESTION # 76
What does the system status LED look like when an over temperature or major alarm occurs on the Cisco UCS
6120XP Fabric Interconnect?
- A. Amber
- B. Red
- C. Blinking amber
- D. Blinking red
Answer: C
NEW QUESTION # 77
What are the two layers in the SAN hierarchy? (Choose two.)
- A. Connection layer
- B. Protocol layer
- C. Fabric layer
- D. Switch layer
- E. Storage layer
Answer: A,E
NEW QUESTION # 78
Which two Cisco Nexus switches provide the foundation of the Cisco Application Centric Infrastructure? (Choose two.)
- A. Cisco Nexus 9508 switch
- B. Cisco Nexus 93128TX switch
- C. Cisco Nexus 7718 switch
- D. Cisco Nexus 7710 switch
- E. Cisco Nexus 6004 switch
Answer: A,B
NEW QUESTION # 79
Which two statements about PCIe are true? (Choose two.)
- A. The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or
64-bit, parallel signal path. - B. The PCIe 4.0 standard doubles the transfer rate compared to PCIe 5.0.
- C. The PCle supports native hot-swap functionality.
- D. A link that is composed of four lanes is called an x4 link.
- E. You can install a PCI Express x16 adapter into an x4 slot.
Answer: B,D
NEW QUESTION # 80
Refer to the exhibit.
Which item does A represent?
- A. Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers
- B. SuperCap module for Cisco UCS B420 M3 Blade Servers
- C. Virtual Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers
- D. Virtual Interface Card for Cisco UCS B420 M3 Blade Servers
- E. mLOM for Cisco UCS B420 M3 Blade Servers
Answer: E
NEW QUESTION # 81
Which two types of information does the show module NX-OS command display? (Choose two.)
- A. Module ports type
- B. Module license information
- C. Module type
- D. Module status
- E. Module IP address
Answer: C,D
NEW QUESTION # 82
Refer to the exhibit.
What is the name of this rack-mount server?
- A. Cisco UCS C220 Rack-Mount Server
- B. Cisco UCS C240 Rack-Mount Server
- C. Cisco UCS C460 Rack-Mount Server
- D. Cisco UCS C420 Rack-Mount Server
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION # 83
Which Cisco MDS 9700 Series platform supports the Supervisor-1E module?
- A. Cisco MDS 9718
- B. Cisco MDS 9706
- C. Cisco MDS 9709
- D. Cisco MDS 9710
Answer: A
NEW QUESTION # 84
Which two form factors are available in the Cisco UCS E-Series Servers? (Choose two.)
- A. WIC
- B. EHWIC
- C. VIC
- D. PVDM
- E. NIM
Answer: B,E
Explanation:
Explanation/Reference: https://www.cisco.com/c/dam/global/de_de/products/servers-unified-computing/product-listing/pdf/ data_sheet_c78-705787.pdf
NEW QUESTION # 85
How does RAID function?
- A. RAID parity information can be stored across multiple RAID levels.
- B. RAID drive group appears to the host computer as multiple physical storage units.
- C. RAID provides data redundancy with either odd parity or even parity.
- D. RAID is a scheme used to logically combine several independent disks to form an array or group of drives.
Answer: D
NEW QUESTION # 86
Which command can be used to exit to EXEC mode from this current mode?
switch(config-if) #
- A. quit
- B. Ctrl-C
- C. end
- D. exit
- E. Ctrl-L
Answer: C
NEW QUESTION # 87
Which two commands allow you to view the state of high availability between the two clustered Fabric Interconnects? (Choose two.)
- A. show cluster state
- B. show cluster state extended
- C. show cluster HA status
- D. show cluster extended-state
- E. show cluster HA state
Answer: A,D
NEW QUESTION # 88 
Refer to the exhibit. Which item does C represent?
- A. mLOM Connector
- B. CMOS Battery
- C. Internal USB
- D. GPU
- E. Mini Storage Connector
Answer: E
Explanation:
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-b-series- blade-servers/b200m5-specsheet.pdf
NEW QUESTION # 89
Which two statements about the Cisco Nexus 5596UP switch are true? (Choose two.)
- A. Its power supplies and fan trays are hot-swappable.
- B. It supports up to 96 10G BASE-T ports.
- C. It has one expansion slot.
- D. It supports unified ports.
- E. It is offered in a one-rack-unit form factor.
Answer: A,D
NEW QUESTION # 90
Refer to the exhibit.
Which option should you select to get the output of the show tech-support detail command for the Cisco UCS B-Series blade?
- A. B - chassis
- B. C - fabric-extender
- C. A - ucsm
- D. D - rack-server
Answer: A
NEW QUESTION # 91
Refer to the exhibit.
Where is the best place to find the B200 BIOS version used in a specific Cisco UCS Manager version?
- A. A - Installed Firmware
- B. B - Packages
- C. E - Management Extension
- D. C - Images
- E. D - Capability Catalog
Answer: B
NEW QUESTION # 92
......
010-151 certification guide Q&A from Training Expert PassTorrent: https://www.passtorrent.com/010-151-latest-torrent.html
The Best CCT Data Center Study Guide for the 010-151 Exam: https://drive.google.com/open?id=1oNSzRmRjEjcf0v2WjZ7anmNLaBErtk6R